Siemens 6AV7613-0AA10-0CG0 SIMATIC Panel PC 670 Panel PC

Description

The Siemens 6AV7613-0AA10-0CG0 is a panel-mount industrial computer from the SIMATIC Panel PC 670 series. This unit is equipped with a 12-inch TFT display, an Intel Celeron 300 MHz CPU, 64 MB of RAM, and a 20 GB hard drive. It is designed for machine-level visualization and control tasks and comes pre-installed with a multi-language version of the Windows 2000 operating system. The package includes a European mains power cable for direct connection to standard AC power sources.

Features

• 12-inch color TFT display for clear process visualization.
• Powered by an Intel Celeron processor operating at 300 MHz.
• Equipped with 64 MB of system RAM.
• Includes a 20 GB hard drive for operating system and application storage.
• Pre-loaded with Windows 2000 (Multi-Language: English, German, French, Italian, Spanish).
• Supports a wide input voltage range of 115-230V AC.

Applications

• Human-Machine Interface (HMI) for manufacturing lines.
• Process visualization and data acquisition in industrial plants.
• Machine control and monitoring stations.
• Supervisory control systems in smaller-scale applications.

Technical Specifications

Installation Guidelines

1. 1 Prepare Panel Cutout: Ensure the mounting cutout in the enclosure or panel is clean, burr-free, and matches the PC's specified dimensions. Verify the panel surface is flat to ensure a proper seal.
2. 2 Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a cross-pattern to apply uniform pressure on the gasket. Do not over-tighten.
3. 3 Establish Ground Connection: Connect the chassis ground terminal on the rear of the unit to the main protective earth (PE) busbar of the enclosure using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
4. 4 Connect Power: With the main power source locked out, connect the provided mains cable to the unit's power input socket. Ensure the source voltage matches the 115-230V AC rating.
5. 5 Connect Peripherals: Connect any required communication cables (e.g., Ethernet, serial) and I/O devices. Ensure proper cable routing and strain relief to prevent damage to connectors.