Siemens 6AV7613-0AB22-0BE0 SIMATIC Panel PC 670

Description

This is a Siemens 6AV7613-0AB22-0BE0 SIMATIC Panel PC 670, an industrial computer designed for human-machine interface (HMI) and control applications. This standard configuration features a 12-inch TFT display, a Pentium III 500 MHz CPU, and is equipped with 128 MB of RAM. For storage, it includes a 20 GB hard drive and an integrated CD-ROM drive. The unit is powered by a 115-230V supply and comes with a U.S. mains cable. Please note, this model is part of an obsolete product line and is supplied with a German-language version of Windows 98.

Features

• 12-inch TFT color display for process visualization
• Pentium III processor operating at 500 MHz
• 128 MB of system RAM
• 20 GB internal hard drive for application and data storage
• Integrated CD-ROM drive for software installation
• Wide input voltage range of 115-230V AC

Applications

• Machine-level HMI and process control
• Data acquisition and logging systems
• Supervisory control in manufacturing lines
• Replacement for legacy PC-based control systems
• Industrial automation and plant floor visualization

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet is de-energized and locked out. Verify the absence of voltage before proceeding.
2. 2 Prepare the panel cutout according to the manufacturer's dimensional drawings for the PC 670 series. Ensure the mounting surface is clean, flat, and rigid.
3. 3 Mount the Panel PC into the cutout and secure it using the provided mounting clamps. Tighten clamps evenly to the specified torque to ensure a proper seal and prevent bezel distortion.
4. 4 Connect the protective earth (PE) conductor to the designated chassis ground terminal. A low-impedance ground connection is critical for safety and noise immunity.
5. 5 Connect the 115-230V AC power supply using the provided mains cable. Ensure the source voltage matches the unit's requirements. Route power cables separately from signal and communication cables.
6. 6 Connect all required communication and I/O cables. After installation is complete and the cabinet is closed, remove the lockout and re-energize the system for commissioning.