Siemens 6AV7703-1DC10-0AC0 SIMATIC Panel PC 870

Description

This Siemens 6AV7703-1DC10-0AC0 is a SIMATIC Panel PC 870 standard configuration unit designed for industrial human-machine interface (HMI) applications. It features a 12.1-inch color TFT display, a Pentium III 1.26 GHz processor, and 128 MB of RAM. The system is equipped with a 40 GB EIDE hard drive, an integrated CD-ROM drive, and comes pre-installed with Windows NT 4.0 SP5 Workstation (English). It is configured for a 230V mains supply and includes a mains cable with a European plug. Note that this product is considered obsolete, making it suitable for maintaining or repairing legacy automation systems.

Features

• 12.1-inch Color TFT Display
• Pentium III 1.26 GHz Processor
• 128 MB RAM
• 40 GB EIDE Hard Drive
• Integrated CD-ROM Drive
• Pre-installed Windows NT 4.0 SP5 Workstation (English)
• Includes mains cable with European plug

Applications

• Machine control interfaces
• Process visualization and monitoring
• Data logging and acquisition systems
• Factory floor automation control
• Legacy system maintenance and support

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet or panel is fully de-energized and locked out according to safety procedures before beginning installation.
2. 2 Verify the panel cutout dimensions are correct for the Panel PC chassis. Ensure a clean, flat, and rigid mounting surface.
3. 3 Insert the Panel PC into the cutout and secure it evenly from the rear using all provided mounting clamps. Do not overtighten.
4. 4 Connect the provided 230V mains cable to the unit's power inlet and to a properly rated and protected power source.
5. 5 Establish a low-impedance connection from the chassis grounding point to the main protective earth (PE) busbar of the cabinet.
6. 6 Connect all required communication, peripheral, and I/O cables. Ensure proper strain relief and cable routing to prevent interference.
7. 7 After verifying all connections are secure and correct, remove the lockout/tagout devices and re-energize the main panel supply to commission the unit.