Siemens 6AV7704-2CC10-0AD0 SIMATIC Panel PC 870

Description

The Siemens 6AV7704-2CC10-0AD0 is a SIMATIC Panel PC 870, a robust industrial computer designed for human-machine interface (HMI) and control tasks. This unit features a 15.1-inch color TFT touch display, 256 MB of RAM, a 40 GByte EIDE hard drive, and an integrated CD-ROM drive. The provided source information details two standard configurations for this model series, differing in processor, power supply, and pre-installed operating system.

Features

• 15.1-inch Color TFT Display
• Integrated Touch Screen Interface
• 256 MB System RAM
• 40 GByte EIDE Hard Disk Drive (HDD)
• Built-in CD-ROM Drive
• Panel-mount industrial form factor

Applications

• Process visualization and control
• Data acquisition and logging
• Manufacturing Execution Systems (MES)
• Machine-level HMI applications
• Industrial automation control rooms

Technical Specifications

Installation Guidelines

1. 1 Prepare Mounting Location: Ensure the panel cutout dimensions are accurate and the mounting surface is clean, flat, and can support the weight of the unit (18.10 kg). Verify adequate clearance for ventilation and cable routing.
2. 2 Mount the Panel PC: Insert the unit into the panel cutout from the front. Secure it from the rear using all provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal and prevent chassis distortion.
3. 3 Establish Ground Connection: Connect the chassis grounding terminal to the cabinet's protective earth (PE) bus bar using a low-impedance conductor. This is critical for both safety and noise immunity.
4. 4 Connect Peripherals and Power: Connect all required interface cables (e.g., Ethernet, serial, USB) before applying power. Route signal cables separately from high-voltage power lines. Connect the appropriate mains power cable (115V or 230V) to a stable, correctly-rated power source.
5. 5 System Power-Up: Once all connections are secure, remove LOTO devices and energize the circuit. Power on the Panel PC and verify correct boot-up of the operating system and application software.