Siemens 6AV7721-1AB00-0AA0 SIMATIC Panel PC 670

Description

The Siemens 6AV7721-1AB00-0AA0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This standard configuration unit is equipped with a 10-inch color TFT display, a Celeron 1.2 GHz processor, and 128 MB of SDRAM-133 memory. It includes a 40 GB EIDE hard drive for data and application storage and is supplied without a pre-installed operating system, providing flexibility for custom software environments. The integrated power supply accommodates a voltage range of 115-230V AC and includes a US mains cable.

Features

• 10-inch Color TFT Display
• Intel Celeron 1.2 GHz Processor
• 128 MB SDRAM-133 Memory (1x128 MB module)
• 40 GB EIDE Hard Disk Drive
• Integrated 115-230V AC Power Supply
• Supplied without an operating system
• Includes US mains power cable

Applications

• Machine-level control and visualization
• Process monitoring and data acquisition
• Factory automation and plant floor computing
• Integration into legacy control systems requiring a robust PC platform

Technical Specifications

Installation Guidelines

1. Panel Cutout and Mounting: Prepare the control cabinet panel cutout according to the device's mechanical drawings. Ensure the mounting surface is clean, flat, and rigid. Insert the Panel PC into the cutout and secure it evenly using all provided mounting clamps to maintain the specified ingress protection rating.
2. Protective Earth (PE) Connection: Connect the chassis ground terminal to the control cabinet's protective earth bus bar using a low-impedance conductor. This connection is critical for operator safety and electromagnetic compatibility (EMC).
3. Power Connection: After confirming the supply voltage matches the unit's rating (115-230V AC), connect the mains cable to a properly fused and protected power source. Ensure the power cable is routed away from high-noise sources like VFDs or large contactors.
4. Peripheral and Network Cabling: Connect all required peripheral devices (keyboard, mouse) and network cables. Use shielded cables for all data communication lines and ensure shields are properly terminated to ground at one end to minimize electrical noise interference.