Siemens 6AV7872-0BF30-0AA0 SIMATIC Panel PC 677B 15-inch Touch Panel PC

Description

The Siemens 6AV7872-0BF30-0AA0 is a SIMATIC Panel PC 677B designed for industrial human-machine interface (HMI) and control applications. This unit features a 15-inch touch display with a 1024x768 resolution and is powered by an Intel Core 2 Duo T7400 processor running at 2.16 GHz. It is equipped with 2 GB of DDR2 RAM and a 160 GB SATA hard drive for application and data storage. Connectivity options include dual Gigabit Ethernet ports, four USB 2.0 ports, a serial port, and an integrated PROFIBUS/MPI interface with 2 MB of buffered SRAM. This model is supplied without an operating system and includes a 110/230 V AC power supply unit.

Features

• 15-inch color touch screen with 1024x768 pixel resolution
• Intel Core 2 Duo T7400 processor operating at 2.16 GHz
• 2 GB of installed DDR2 RAM
• 160 GB 3.5-inch SATA Hard Disk Drive (HDD)
• Dual 10/100/1000 Mbit/s Ethernet ports for network connectivity
• Integrated PROFIBUS/MPI interface with 2 MB buffered SRAM
• Four rear USB 2.0 ports and one front-side USB port
• Expansion capabilities with one PCI and one PCIe x4 slot
• Wide-range 110/230 V AC power supply

Applications

• Process visualization and control
• Machine-level data acquisition and monitoring
• Manufacturing Execution Systems (MES) terminals
• Industrial automation control panels
• Factory floor HMI stations

Technical Specifications

Installation Guidelines

1. 1 Verify that all power to the enclosure is de-energized and locked out according to safety procedures.
2. 2 Prepare the panel cutout according to the device's mechanical drawings. Ensure the mounting surface is clean, flat, and can support the weight of the unit.
3. 3 Insert the Panel PC into the cutout from the front of the enclosure. Secure it in place using the provided mounting clamps, tightening them evenly to ensure a proper seal.
4. 4 Connect a dedicated protective earth (PE) or grounding wire to the designated grounding terminal on the chassis. This is critical for safety and noise immunity.
5. 5 Connect the 110/230 V AC power supply cable to the unit's power input connector. Ensure the source voltage matches the device rating.
6. 6 Connect all required communication and I/O cables (Ethernet, USB, PROFIBUS, Serial). Use shielded cables for all data lines and ensure proper shield termination.
7. 7 After verifying all connections are secure and correct, remove the lockout/tagout and re-energize the main power supply to the enclosure.