Siemens 6AV7894-0AE00-1AC0 SIMATIC IPC677C Panel PC

Description

The Siemens 6AV7894-0AE00-1AC0 is a SIMATIC IPC677C Panel PC designed for demanding Human Machine Interface (HMI) tasks in industrial settings. This unit integrates a 19-inch touchscreen display with a resolution of 1280 x 1024 pixels and is powered by an Intel Core i3-330E processor. It features extensive connectivity options including dual Gigabit Ethernet, PROFIBUS/MPI, and multiple USB 2.0 ports, including a convenient front-side interface. The system is equipped with 1 GB of DDR3 RAM, a 250 GB SATA hard drive, and an onboard RAID controller for data integrity. Integrated monitoring for watchdog, temperature, and fan status ensures operational reliability.

Features

• 19-inch color touchscreen display with 1280 x 1024 resolution.
• Intel Core i3-330E dual-core processor (2.13 GHz, 3 MB Cache).
• Integrated PROFIBUS/MPI interface (CP 5611-A2 compatible).
• Onboard RAID controller for enhanced data storage reliability.
• System health monitoring for watchdog, temperature, and fan.
• Pre-installed with Windows 7 Ultimate (32-bit) Multilingual User Interface.
• Front-panel USB 2.0 port for easy access.
• Dual PCI slots available for hardware expansion.

Applications

• Process visualization and control systems.
• Machine-level data acquisition and operation.
• Factory automation and assembly line management.
• Industrial SCADA and HMI applications.

Technical Specifications

Installation Guidelines

1. 1 Ensure the target enclosure is de-energized and verified to be at zero potential before beginning work.
2. 2 Prepare the panel cutout according to the device's mechanical specifications. Verify dimensions and ensure a clean, burr-free mounting surface.
3. 3 Insert the Panel PC into the cutout from the front. Secure it evenly using all provided mounting clamps to ensure a proper seal and uniform pressure distribution.
4. 4 Connect the functional earth (FE) or protective earth (PE) terminal to the enclosure's main ground point using a low-impedance conductor. This connection must be made first.
5. 5 Connect the 24 V DC power supply, observing correct polarity. Use appropriately sized conductors for the load and distance.
6. 6 Connect all required communication cables, such as Ethernet and PROFIBUS. Ensure proper shielding and grounding practices are followed for all data cables to minimize noise interference.
7. 7 After verifying all connections, remove the lockout/tagout and re-energize the main panel circuit. Power on the Panel PC and confirm successful boot-up and network connectivity.