Siemens 6ES7675-1DK40-2AB0 SIMATIC IPC427C Microbox PC Bundle

Description

The Siemens 6ES7675-1DK40-2AB0 is a compact, fanless SIMATIC IPC427C Microbox PC bundle designed for demanding control and visualization tasks. This unit is equipped with an Intel Core 2 Duo 1.2 GHz processor, 4 GB of DDR3 RAM, and a 50 GB high-endurance SATA solid-state drive (SSD). It comes pre-configured with a software suite including Windows Embedded Standard 2009, WinCC flexible 2008 for HMI applications, and the WinAC RTX 2010 software controller, providing a ready-to-deploy platform for machine-level automation.

Features

• Processor: Intel Core 2 Duo at 1.2 GHz with 800 MHz FSB
• Memory: 4 GB DDR3 1066 SODIMM
• Storage: 50 GB high-endurance SATA Solid-State Drive (SSD)
• Onboard Interfaces: Two Gigabit Industrial Ethernet ports and one PROFIBUS DP port
• Pre-installed Operating System: Windows Embedded Standard 2009
• Pre-installed Software: SIMATIC WinCC flexible 2008 and SIMATIC WinAC RTX 2010
• Fanless design for maintenance-free operation in harsh environments

Applications

• Machine-level control and regulation tasks
• Human-Machine Interface (HMI) systems
• Data acquisition and logging gateways
• Compact control solutions in manufacturing and process automation

Technical Specifications

Installation Guidelines

1. 1 Verify panel cutout dimensions are correct for the IPC427C chassis. Ensure adequate clearance around the unit for heat dissipation and cable routing.
2. 2 Securely mount the Microbox PC to the control panel or mounting plate using all specified mounting points and appropriate hardware to ensure mechanical stability.
3. 3 Connect a low-impedance chassis ground to the designated grounding terminal on the IPC. This is essential for both safety and noise immunity.
4. 4 Terminate Industrial Ethernet and PROFIBUS DP cables. Use shielded, industrial-grade cabling and ensure shields are properly terminated to minimize electromagnetic interference.
5. 5 Connect the 24V DC power supply to the power input terminals, carefully observing correct polarity to prevent damage to the unit.
6. 6 After verifying all connections, re-energize the system and perform initial power-on tests and software configuration as required by the application.