Siemens SIMATIC PANEL PC 670 6AV7613-0AF30-0CF0 Panel PC

Description

This is a Siemens SIMATIC PANEL PC 670, model 6AV7613-0AF30-0CF0, designed for industrial human-machine interface (HMI) and control applications. The unit is equipped with a 12-inch TFT display, a 300 MHz Celeron processor, and 256 MB of RAM. For storage, it includes a 40 GB hard drive and a CD-ROM drive. This configuration comes pre-installed with the Windows 98 operating system in English and includes a European mains power cable. Please note that this product line is considered obsolete by the manufacturer.

Features

• 12-inch color TFT display for process visualization.
• Intel Celeron processor operating at 300 MHz.
• 256 MB of system RAM.
• Integrated 40 GB hard drive and CD-ROM drive.
• Pre-loaded with Windows 98 (English version).
• Supports a wide input voltage range of 115-230 V AC.

Applications

• Machine-level operator control and monitoring
• Process visualization and data acquisition
• Industrial data logging and reporting stations
• Factory floor information terminals

Technical Specifications

Installation Guidelines

1. 1 Prepare Mounting Location: Ensure the panel cutout dimensions are accurate and the mounting surface is clean, flat, and can support the weight of the unit. Verify adequate clearance for ventilation and cable routing at the rear of the PC.
2. 2 Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamps evenly in a cross-pattern to ensure a uniform seal against the panel gasket. Do not over-torque the clamps.
3. 3 Connect Protective Earth (PE): Connect a dedicated, low-impedance protective earth conductor to the designated grounding terminal on the PC chassis. This is critical for operator safety and noise immunity.
4. 4 Connect Power: With the main power source de-energized and locked out, connect the provided mains cable to the unit's power inlet. Ensure the source voltage matches the 115-230 V AC rating.
5. 5 Connect Peripherals: Connect any required communication cables (e.g., Ethernet, serial) and I/O devices. Route cables neatly and avoid routing signal cables parallel to high-power AC lines to prevent interference.