Designed for high-inertia, heavy-duty industrial positioning, the Mitsubishi Electric HA-LP11K2-K delivers robust motion control within the MELSERVO drive ecosystem. This high-capacity industrial servo motor is engineered to handle demanding dynamic loads, providing precise torque control and reliable continuous operation in harsh manufacturing environments.
| Manufacturer | Mitsubishi Electric |
| Model Number | HA-LP11K2-K |
| Series | MELSERVO HA-LP Series |
| Product Type | Servo Motor |
| Rated Output | 11 kW |
| Rated Torque | 52.5 N-m |
| Power Rate at Continuous Rated Torque | 263 kW/s |
| IP Rating | IP44 |
| Shipping Weight (Calculated) | 55 kg |
The HA-LP11K2-K is designed to pair natively with Mitsubishi MR-J3-11KA or MR-J4-11KA servo amplifiers. When replacing older HA-LP units, verify the encoder cable connector style, as older revisions may require adapter cables (MR-EKCBL or MR-PWCBL series) to interface with newer amplifier generations.
Due to the high rotor inertia (52.5 N-m rated torque), ensure the amplifier's regenerative braking option (such as an external GRZG or FR-ABR resistor) is correctly sized. Insufficient regeneration capacity during rapid deceleration cycles will trigger an "Overvoltage (AL 33)" alarm on the associated MR series drive.
Always use double-shielded twisted-pair cabling for the encoder feedback to prevent high-frequency electromagnetic interference (EMI) from the main motor power lines. Ensure the motor frame is grounded directly to the control panel's common ground busbar using a low-impedance strap.
CRITICAL WARNING:
Ensure all primary three-phase power sources are fully de-energized and locked out before attempting installation or maintenance. Allow at least 15 minutes for the servo amplifier's internal bus capacitors to discharge completely. Verify zero voltage across the DC bus terminals before disconnecting any wiring.
Mount the motor securely to a rigid, vibration-free machine base using high-tensile bolts.
Align the motor shaft precisely with the load shaft using a flexible coupling to prevent radial and axial bearing overload.
Connect the heavy-duty power cables (U, V, W, and Ground) and the encoder feedback cable, ensuring all seals are tight to maintain the IP44 rating.
Perform a manual shaft rotation test to verify free movement before applying control power.
Global Express Shipping
Returns & Warranty
Manufacturer: Mitsubishi Electric
Product No.: HA-LP11K2-K
Country of origin:United States
Product Type: Servo Motors
Payment: T/T, Western Union
Weight: 55000g
Shipping port: Xiamen
Warranty: 12 months
Designed for high-inertia, heavy-duty industrial positioning, the Mitsubishi Electric HA-LP11K2-K delivers robust motion control within the MELSERVO drive ecosystem. This high-capacity industrial servo motor is engineered to handle demanding dynamic loads, providing precise torque control and reliable continuous operation in harsh manufacturing environments.
| Manufacturer | Mitsubishi Electric |
| Model Number | HA-LP11K2-K |
| Series | MELSERVO HA-LP Series |
| Product Type | Servo Motor |
| Rated Output | 11 kW |
| Rated Torque | 52.5 N-m |
| Power Rate at Continuous Rated Torque | 263 kW/s |
| IP Rating | IP44 |
| Shipping Weight (Calculated) | 55 kg |
The HA-LP11K2-K is designed to pair natively with Mitsubishi MR-J3-11KA or MR-J4-11KA servo amplifiers. When replacing older HA-LP units, verify the encoder cable connector style, as older revisions may require adapter cables (MR-EKCBL or MR-PWCBL series) to interface with newer amplifier generations.
Due to the high rotor inertia (52.5 N-m rated torque), ensure the amplifier's regenerative braking option (such as an external GRZG or FR-ABR resistor) is correctly sized. Insufficient regeneration capacity during rapid deceleration cycles will trigger an "Overvoltage (AL 33)" alarm on the associated MR series drive.
Always use double-shielded twisted-pair cabling for the encoder feedback to prevent high-frequency electromagnetic interference (EMI) from the main motor power lines. Ensure the motor frame is grounded directly to the control panel's common ground busbar using a low-impedance strap.
CRITICAL WARNING:
Ensure all primary three-phase power sources are fully de-energized and locked out before attempting installation or maintenance. Allow at least 15 minutes for the servo amplifier's internal bus capacitors to discharge completely. Verify zero voltage across the DC bus terminals before disconnecting any wiring.
Mount the motor securely to a rigid, vibration-free machine base using high-tensile bolts.
Align the motor shaft precisely with the load shaft using a flexible coupling to prevent radial and axial bearing overload.
Connect the heavy-duty power cables (U, V, W, and Ground) and the encoder feedback cable, ensuring all seals are tight to maintain the IP44 rating.
Perform a manual shaft rotation test to verify free movement before applying control power.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
