Bently Nevada 16925-33 Interconnect Cable

Description

16925-33 is a 3-conductor shielded 22 AWG (0.5 mm2) interconnect cable designed for critical machinery monitoring applications. This specific configuration features a length of 33 ft (10.0 m), terminating with a 3-socket plug on one end and terminal lugs on the other.

Engineered for use with Bently Nevada acceleration transducers such as the 330400 and 330425 series, this cable ensures signal integrity in industrial environments. The shielded construction protects against electromagnetic interference, while the robust 3-socket plug provides a secure connection to the accelerometer sensor. This cable supports a minimum length of 2.0 ft (0.6 m) and a maximum length of 99 ft (30 m).

Features

• 3-conductor shielded 22 AWG (0.5 mm2) construction
• 3-socket plug connector at one end
• Terminal lugs at the other end for secure termination
• Length of 33 ft (10.0 m)
• Designed for compatibility with 330400 and 330425 accelerometers
• Suitable for critical machinery vibration monitoring

Applications

• Gear mesh monitoring
• Casing acceleration measurements
• Critical rotating machinery protection
• Industrial condition monitoring systems

Ordering Information

Technical Specifications

Installation Guidelines

For optimal performance, this cable should be installed in protective conduit. Ensure the connector is fully seated to maintain IP68-equivalent protection at the sensor interface. Avoid routing cables near high-voltage lines to prevent induced noise. The mating connector requires minimal torque; follow accelerometer installation manual guidelines for proper cable strain relief.