Bently Nevada 330903-00-05-05-01-00 3300 XL NSv Proximity Probe

Description

Option 00 (0.0 in unthreaded) and Option 05 (0.5 in case length) specify this 330903-00-05-05-01-00 3300 XL NSv 5 mm proximity probe configuration. This non-contact eddy-current transducer is designed for displacement measurements where standard 8 mm probes cannot fit due to restricted target geometry or limited physical space. It functions as part of the 3300 XL NSv system, which pairs with the 330980 Proximitor sensor and 330930 extension cable to maintain calibrated performance for small-bore machinery and high-speed equipment.

The system is specifically engineered for applications with reduced target area requirements, such as aeroderivative turbines and small rotating components. This configuration utilizes a 0.5 m total length and standard miniature coaxial ClickLoc connectors, suitable for standard monitoring installations where agency-certified hazardous area protection is not mandated by the application.

Features

• 5 mm probe tip diameter for small-bore machinery and restricted clearance monitoring
• 3/8-24 UNF threaded probe case for mounting
• Standard temperature range: -35 degC to +177 degC
• Miniature coaxial ClickLoc connector for secure signal integrity
• Compatible with 330980 Proximitor sensors and 330930 extension cables

Applications

• Small-bore machinery and rotating equipment
• Aeroderivative gas turbines
• High-speed equipment with limited target geometry
• Axial position and radial vibration monitoring in restricted spaces

Ordering Information

Technical Specifications

Installation Guidelines

Probes should be installed ensuring the probe tip is clear of the target and protected from mechanical abrasion. Use the provided jam nuts for locking the probe position within the housing. Ensure the coaxial cable is routed to prevent bending beyond the specified minimum bend radius and kept away from high-voltage lines to minimize electromagnetic interference. The system requires a matching 330980 Proximitor sensor to calibrate the linear voltage output correctly.

Compliance and Certifications

This configuration (Option 00) does not include specific hazardous area agency certifications.