ProSoft MVI56-PDPMV1 ControlLogix PROFIBUS DPV1 Master Communication Module

Description

Integrating PROFIBUS DP network connectivity directly into Rockwell Automation ControlLogix systems, the ProSoft MVI56-PDPMV1 PROFIBUS DPV1 Master Communication Module functions as an efficient gateway between the PLC backplane and distributed field devices. This single-slot module mounts directly into the ControlLogix chassis, enabling the processor to control slave devices via high-speed cyclic data exchange (DPV0) and configuration/diagnostic acyclic data transfer (DPV1).

The MVI56-PDPMV1 establishes high-speed communication without consuming excessive rack space or requiring complex ladder logic. Featuring a dedicated RS-232 RJ45 serial configuration port, the module also supports remote configuration and diagnostics across EtherNet/IP using CIPConnect technology, allowing engineers to maintain the system through a network-linked ControlLogix Ethernet bridge.

Features

• Provides a seamless PROFIBUS DP Master connection directly within the ControlLogix backplane.
• Supports both DPV0 cyclic messaging for real-time control and DPV1 acyclic messaging for advanced instrument configuration.
• Compatible with CIPConnect, enabling remote diagnostics and network configuration routing through ControlLogix Ethernet modules.
• Equipped with a dedicated RJ45 configuration port operating on the RS-232 standard.
• Comprehensive front-panel LED diagnostics for rapid assessment of module status, backplane transfers, and serial communications.

Applications

• Integration of PROFIBUS field instrumentation (transmitters, valves, actuators) in oil and gas production systems.
• Distributed I/O management in water treatment plants and wastewater facilities.
• Process automation and factory floor machinery integration requiring DPV1 acyclic parameterization.
• Heavy industrial material handling and power generation automation.

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Ensure the ControlLogix chassis is powered off before inserting or removing the module.
• Avoid electrostatic discharge (ESD) damage by using a grounding strap during installation.
• Secure the module in any available slot of the 1756 chassis by aligning with guides and locking the top and bottom latches.
• Verify standard network termination resistors are placed on the end nodes of the PROFIBUS segment.

Compliance and Certifications

• CE Mark
• UL/cUL Class I, Division 2 Hazardous Locations