Siemens 6AV7611-0AE30-0CJ0 SIMATIC Panel PC 670 Panel PC

Description

This is a SIMATIC Panel PC 670 from Siemens, model 6AV7611-0AE30-0CJ0, designed for industrial human-machine interface (HMI) and control applications. This standard configuration features a 10-inch TFT display, a Celeron 300 MHz CPU, 256 MB of RAM, and a 40 GB hard drive. It is pre-installed with the Windows NT 4.0 English operating system and is powered by a 115-230 V AC supply, shipping with a European mains cable. Please note this product is classified as obsolete, making it suitable for maintaining or repairing existing legacy systems.

Features

• ■10-inch color TFT display for process visualization.
• ■Powered by an Intel Celeron 300 MHz processor.
• ■Equipped with 256 MB of system RAM.
• ■Includes a 40 GB internal hard drive for storage.
• ■Pre-loaded with Windows NT 4.0 (English Edition).
• ■Flexible power input range of 115-230 V AC.

Applications

• ■Legacy machine control and visualization (HMI).
• ■Spare part for existing SIMATIC PC 670 installations.
• ■Small-scale SCADA client applications.
• ■Industrial data logging and monitoring stations.

Technical Specifications

Installation Guidelines

1. 1 Prepare the panel cutout according to the device's mechanical drawings. Ensure the mounting surface is clean, flat, and can support the weight of the unit.
2. 2 Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal against the panel. Do not overtighten.
3. 3 Connect a low-impedance protective earth (PE) or functional ground conductor to the designated grounding terminal on the chassis. This is critical for both safety and noise immunity.
4. 4 With the main power source confirmed off, connect the AC power cable to the unit's power input socket. Ensure the source voltage matches the 115-230 V AC rating.
5. 5 Connect all required communication and peripheral cables (e.g., Ethernet, serial, USB, keyboard). Route cables to prevent strain and interference from high-power lines.
6. 6 After verifying all connections are secure and correct, remove the LOTO device and apply power to the unit. Proceed with software configuration and system checks.