Siemens 6AV7812-0BB13-2AA0 SIMATIC Panel PC 877

Description

The Siemens 6AV7812-0BB13-2AA0 is a SIMATIC Panel PC 877 designed for industrial human-machine interface (HMI) and control applications. This unit features a 15-inch touchscreen display, an Intel Pentium 4 2.8 GHz processor, and a redundant storage system with two 60 GB hard drives in a RAID configuration. It is equipped with a front-side USB interface for convenient peripheral access and operates on a wide input voltage range of 110-230V AC. This model is supplied without a pre-installed operating system, allowing for custom software deployment. Please note that this product is considered obsolete by the manufacturer, making it suitable for spare parts and legacy system maintenance.

Features

• 15-inch touchscreen display with 1024x768 resolution
• Intel Pentium 4 processor operating at 2.8 GHz
• 512 MB DDR266 SDRAM
• Dual 60 GB 2.5-inch SATA HDDs in a RAID configuration for data redundancy
• Front-accessible USB interface
• Integrated CD-R/RW/DVD combination optical drive
• Supplied without a pre-installed operating system

Applications

• Machine control interfaces (HMI)
• Process visualization and SCADA nodes
• Data logging and acquisition stations
• Factory floor information terminals
• Maintenance of legacy automation systems requiring this specific hardware

Technical Specifications

Installation Guidelines

1. Verify panel cutout dimensions against the unit's physical specifications before attempting to mount. Ensure adequate clearance for ventilation and cable routing.
2. Mount the Panel PC securely into the prepared cutout using the provided mounting hardware. Ensure all clamps are tightened evenly to create a proper seal.
3. Connect the chassis to the cabinet's protective earth (PE) or grounding bus using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
4. Connect the AC power supply using the provided European power cable to a stable source within the 110-230V AC range.
5. Connect necessary peripherals such as network cables, keyboards, and mice to the appropriate rear or front ports.
6. After verifying all connections, restore power to the unit and proceed with operating system and application software installation.