Bently Nevada 330173-00-02-10-02-00 3300 Series 5mm Proximity Probe

Description

Engineered for precise dynamic shaft displacement and vibration measurements, the Bently Nevada 330173-00-02-10-02-00 non-contacting sensor provides critical feedback within machinery protection architectures. Part of the proven 3300 Series, this 5mm proximity probe operates on eddy current principles to measure static and dynamic distances between the probe tip and the observed conductive target. Built with a polyphenylene sulfide (PPS) tip and an AISI 304 stainless steel case, this configuration features a 20 mm case length, a 1.0-meter total cable length, and a miniature coaxial ClickLoc connector, making it exceptionally reliable in harsh turbine and compressor environments.

Features

• 5mm Tip Diameter: Ideal for applications with tight physical mounting clearances or smaller target areas.
• High-Durability Materials: Chemically resistant Polyphenylene Sulfide (PPS) tip protects against aggressive lubrication oils and high-temperature environments.
• Corrosion-Resistant Housing: Standard AISI 304 Stainless Steel (SST) threaded body ensures physical integrity over long operational lifespans.
• ClickLoc Coaxial Connection: Gold-plated miniature coaxial ClickLoc connector provides a secure, vibration-proof link to the extension cable with low resistance.
• Flexible Mounting: Fully unthreaded body (0 mm unthreaded length option) allows for low-profile direct-thread installation.

Applications

• Radial vibration and shaft dynamic alignment monitoring on fluid-film bearing machines.
• Axial thrust position measurement on steam turbines, gas turbines, and industrial compressors.
• Phase reference and speed sensing (Keyphasor) applications on high-speed rotating shafts.
• Vibration analysis and diagnostic instrumentation inside tight machinery housings.

Technical Specifications

Connections and Interfaces

Empirical Engineering Insights

Alternative Models & Compatibility

The 330173 series 5mm proximity probe is fully compatible with the 3300 XL 5mm Proximitor Sensor system. Please note that while the physical mounting footprint matches certain standard 8mm probe locations, the 5mm system possesses a distinct calibration curve (typically 7.87 V/mm or 200 mV/mil when properly paired with its designated driver). Do not mix 5mm and 8mm components in the same measurement loop as doing so will induce severe scaling errors.

Application Pitfalls & Engineering Notes

Because this specific probe configuration has an overall case length of 20 mm with 0 mm unthreaded length, ensure that your bracket thickness does not exceed the case thread length. Insufficient thread engagement can lead to rotational loosening from machine vibrations. Ensure a minimum radial clearance of at least 15 mm of free area around the probe tip to prevent side-loading calibration drift caused by nearby structural metals.

Commissioning & Wiring Tips

When routing the 1.0-meter integrated probe cable, avoid sharp bends. Maintain a minimum bend radius of 25.4 mm (1.0 inch) to prevent internal coaxial cable damage. Always use the Bently Nevada recommended ClickLoc connector tool for final mating; do not apply excessive hand force or pliers, which can crush the gold-plated contact pins and introduce signal noise.

Installation Guidelines