Honeywell EXPERION PKS TK-SMPC01 SIM FTA Power Adapter

Description

The Honeywell TK-SMPC01 is a conformal-coated, high-reliability SIM FTA Power Adapter designed for use within the Honeywell Experion PKS (Process Knowledge System) architecture. It functions as the dedicated power regulation and interface component for the Serial Interface Module (SIM) Field Termination Assembly (FTA), establishing a reliable hardware infrastructure to power communications between qualified third-party serial devices and Experion C200 or C300 controllers via the MODBUS or Allen-Bradley DF1 protocols.

The TK-SMPC01 module handles wide-range alternating current inputs from 85 to 265 Vac, making it highly versatile for global industrial electrical distribution systems. It accommodates flexible installations with integrated options to mount on standard DIN rails or flat surfaces inside or outside marshalling cabinets. The "TK" prefix specifies that this assembly features a robust conformal coating, providing enhanced environmental resilience against moisture, airborne contaminants, and corrosive atmospheres typical of severe industrial processing environments.

Features

• Wide-range input capability accepting standard 85 to 265 Vac distribution power.
• Fully conformal-coated hardware layer ("TK" model) for superior atmospheric corrosion resistance.
• Seamless power delivery optimized specifically for Experion PKS SIM FTA modules.
• Supports high-availability long-distance topologies up to 300 meters from the power adapter to the FTA.
• Highly flexible mechanical design supporting simple DIN rail or direct flat surface mounting.
• Built-in robust protection profiles including high ESD and surge safeguards.

Applications

• Distributed Control Systems (DCS) power infrastructures
• Powering Modbus RTU (RS232 / RS485) and Allen-Bradley DF1 Serial Interface FTAs
• Asset management and third-party subsystem interface links
• Heavy industrial automation deployments in harsh or corrosive environments

Technical Specifications

Installation Guidelines

• Mounting Setup: Mount the adapter securely onto a standard industrial DIN rail or screw it tightly to a flat panel surface. Grasp both rail mount adapters on the tapered side and apply direct pressure when locking it onto a DIN rail.
• Cable Routing and Distance: Connect the SIM-to-Power Adapter cable (TC-KSM003/005/010) between the controller chassis SIM and the power adapter. Ensure the separate Power Adapter-to-FTA cable (MU-KLAM or MU-KSX series) does not exceed the maximum engineering distance of 300 meters (984 feet).
• Power Connection: Verify that the primary mains source is completely turned off before inserting or routing power cable leads into the designated AC connector blocks.
• Electrostatic Precautions: Always observe standard ESD hazard mitigation procedures when performing mechanical installation, terminal assignments, or field servicing.

Compliance and Certifications

• IEEE SWC 472-1974
• IEEE 801.2

FAQ

What is the core function of the TK-SMPC01 power adapter?

It accepts wide-range alternating current to safely regulate and distribute power directly to the Serial Interface Module Field Termination Assembly in an Experion system.

What is the difference between the TC-SMPC01 and the TK-SMPC01 models?

The model number with the TK prefix denotes a fully conformal-coated version designed to protect internal electronics against harsh, humid, or corrosive industrial environments.

What specific range of input voltage does this power adapter accept?

This unit accepts any incoming alternating current voltage between 85 and 265 Vac.

What line frequencies are supported by the AC input stage?

The AC electrical stage supports nominal system frequencies ranging from 47 to 63 Hz.

What is the absolute maximum power consumption of this assembly?

The maximum power consumption rating for the device is exactly 12 W.

How far away can the power adapter be located from the corresponding SIM FTA?

The maximum permissible field routing distance between the power adapter and the destination FTA is 300 meters (984 feet).

Can this device be used with direct current input systems?

No, this model is designed for 85 to 265 Vac installations. For direct current applications, the 24 Vdc model (TK-SMPD01) should be utilized.

What types of physical mounting configurations are supported?

The physical chassis is designed with multi-use provisions allowing for secure DIN rail attachment or direct flat surface mounting.

Does this hardware support multiple serial interface protocols on the connected FTA?

Yes, it powers the FTAs that communicate via standard Modbus RTU (RS232/RS485) and Allen-Bradley DF1 asynchronous serial configurations.

What transient or surge protections are engineered into this device?

The module features integrated safety layers that comply with IEEE SWC 472-1974 and IEEE 801.2 standards for ESD and surge protection.

What steps are required to safely remove a failed power adapter from a DIN rail?

Turn off the power source, disconnect the power and interface cables, grasp both rail mount adapters on the tapered side, and pull forward slightly to pop the adapter off the rail.