Siemens 6AV7240-3BB04-0EA0 SIMATIC IPC 477D 15" Panel PC

Description

The Siemens 6AV7240-3BB04-0EA0 is a SIMATIC IPC 477D series industrial panel PC designed for machine-level visualization and control tasks. This unit integrates a 15-inch touch display with an Intel Core i3-3217UE processor. It is configured with 2 GB of RAM and a 16 GB CFast card for storage, running on the Windows Embedded Standard 7 (32-bit) operating system. Connectivity is provided through dual Gigabit Ethernet ports, multiple USB interfaces, and an RS-232 serial port. The device operates on a standard 24 V DC industrial power supply and is delivered without additional SIMATIC application software.

Features

• 15-inch color touch display for operator interface
• Powered by an Intel Core i3-3217UE processor
• Equipped with 2 GB of system memory (RAM)
• Includes a 16 GB CFast card for operating system and data storage
• Dual Gigabit Ethernet ports for network integration (IE/PN)
• Features five USB ports (4 rear, 1 front) and one RS-232 serial port
• Pre-installed with Windows Embedded Standard 7 (32-bit)
• Designed for a 24 V DC power input

Applications

• Human Machine Interface (HMI) for manufacturing lines
• Process visualization and control in industrial environments
• Machine-level data acquisition and logging
• Supervisory control systems in smaller applications

Technical Specifications

Installation Guidelines

1. 1 Verify the panel cutout dimensions against the device's mechanical specifications to ensure a proper fit.
2. 2 Insert the Panel PC into the prepared cutout from the front of the enclosure.
3. 3 From the rear, install and tighten the mounting clamps evenly around the perimeter to secure the unit and ensure proper gasket compression for the required IP rating.
4. 4 Connect the protective earth (PE) conductor to the designated terminal on the IPC chassis. This is a mandatory safety connection.
5. 5 Connect the 24 V DC power supply, ensuring correct polarity. Use appropriately sized conductors for the load.
6. 6 Connect Ethernet, USB, and any serial devices as required by the application. Ensure proper cable routing and strain relief.
7. 7 After verifying all connections are secure and correct, remove LOTO devices and re-energize the cabinet to commission the Panel PC.