Manufacturer: Siemens
Product No.: 6AV7240-4DL34-1PA0
Country of origin:Niemcy
Product Type: Industrial PCs
Barcode: 85371098
Payment: T/T, Western Union
Weight: 7680g
Dimensions: 50 x 40 x 20 cm
Shipping port: Xiamen
Warranty: 12 months
The Siemens 6AV7240-4DL34-1PA0 SIMATIC IPC 477D Panel PC is a fanless industrial computing platform designed for continuous operation in harsh environments. It integrates a 19-inch resistive touch display with a 4:3 aspect ratio, powered by an Intel Core i3-3217UE processor. The unit provides 4 GB of RAM with integrated NVRAM and an 80 GB MLC SSD for data integrity. Pre-installed with Windows Embedded Standard 7 and licensed for WINAC RTX 2010 and WINCC RT Advanced, it serves as a dedicated controller and visualization terminal for distributed control systems.
| Model | Description |
| 6AV7240-4DL34-1PA0 | SIMATIC IPC 477D, 19" Touch, Core i3, 4GB RAM, 80GB SSD, Win Emb Std 7, WinAC RTX 2010, WinCC RT Adv V13/V15 |
| Category | Parameter | Specification |
|---|---|---|
| General | Manufacturer | Siemens |
| Country of Origin | Germany | |
| Product Type | Industrial Panel PC | |
| Net Weight | 6.40 kg | |
| Shipping Weight (Calculated) | 7.68 kg | |
| Display & Computing | Display Size | 19 inches |
| Resolution | XGA 1280 x 1024 pixels | |
| Processor | Intel Core i3-3217UE, 1.6 GHz | |
| Memory | 4 GB DDR3 with NVRAM | |
| Storage | 80 GB SSD (MLC) | |
| Expansion | No PCIe slots | |
| Software | Operating System | Windows Embedded Standard 7 (32-bit) |
| Soft PLC | WINAC RTX 2010 SP2 | |
| HMI Runtime | WINCC RT Advanced V13 SP1 (2048 PowerTags) | |
| HMI License | WINCC RT Advanced V15 Package | |
| Interfaces | Ethernet | 2 x 10/100/1000 Mbps (IE/PN) |
| Fieldbus | PROFIBUS DP 12 Mbps Master | |
| Serial | 1 x RS-232 | |
| USB | 4 x Rear, 1 x Front (USB 2.0) | |
| Power Input | 24 V DC | |
| Logistics | Commodity Code | 85371098 |
| Package Dimensions (Calculated) | 500 mm x 400 mm x 200 mm |
| Connector / Port | Function / Assignment |
|---|---|
| RJ45 (x2) | Gigabit Ethernet (PROFINET / Industrial Ethernet) |
| DB9 Female | RS-232 Serial Communication |
| SUB-D 9-pin Male | PROFIBUS DP 12 Mbps Interface |
| USB Type A (x5) | Peripheral Connection (Keyboard, Mouse, Storage) |
| M12 Power Connector | 24 V DC Supply Input |
CRITICAL WARNING
De-energize all connected control circuits before mounting or servicing. Capacitors within the IPC retain charge after power removal. Disconnect 24 V DC supply and wait 60 seconds before handling connectors. Failure to observe electrostatic discharge (ESD) precautions will result in permanent hardware damage.
1 Verify panel cutout dimensions match the 19-inch format. Ensure rear clearance of at least 100 mm for cable bending radius and heat dissipation.
2 Connect the 24 V DC power line using appropriately sized ferrules. Torque M4 terminal screws to 0.8 N-m. Reverse polarity protection is active, but incorrect wiring may trigger internal fuses.
3 Ground the chassis via the PE (Protective Earth) terminal on the power connector. Use a copper conductor with minimum cross-section of 2.5 mm². Do not rely solely on DIN rail grounding for EMC compliance.
4 For PROFIBUS DP termination, activate the built-in terminating resistor via DIP switch if the unit is the last node on the bus segment. Set the PROFIBUS address via hardware DIP switches prior to applying power.
Globalna ekspresowa wysyłka
Zwroty i gwarancja
Zamówienia są przetwarzane i dostarczane od poniedziałku do piątku (z wyłączeniem dni świątecznych).
Aby poznać pełne warunki kwalifikowalności, opłaty za przyjęcie towaru z powrotem oraz szczegóły dotyczące zwrotów międzynarodowych, prosimy zapoznać się z naszym oficjalnym Polityka zwrotów i zwrotu pieniędzy .
| Color pattern |
Szaro-biały
|
| Country of origin |
Niemcy
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
This article explains how PLC systems perform core mathematical operations such as addition, subtraction, multiplication, division, modulo, and exponentiation within industrial automation. It shows...
The article explains several advanced Boolean logic functions used in PLC programming beyond basic AND, OR, and NOT operations. It covers how tools like truth tables, multiplexers, pulse generators,...
Boolean logic is the foundation of every PLC program. From simple machine controls to complex industrial automation systems, logic gates determine how controllers respond to changing inputs and...
Industrial firewalls play a critical role in OT cybersecurity, protecting PLC, DCS, and SCADA networks through segmentation, ingress/egress control, and IDS/IPS integration aligned with IEC 62443...
Modern robotic grippers are evolving beyond traditional mechanical jaws. From gecko-inspired adhesive systems and soft food-grade grippers to AI-powered warehouse tools, advanced gripping...
