Siemens 6AV7612-0AE10-0BG0 SIMATIC Panel PC 670 Panel PC

Description

This device is a Siemens 6AV7612-0AE10-0BG0 SIMATIC Panel PC 670, an integrated human-machine interface (HMI) designed for industrial control and visualization applications. It features a 12-inch TFT touch display and is configured with a 300 MHz Celeron CPU, 64 MB of RAM, and a 40 GB hard drive. The unit is powered by a 115-230V AC supply and is pre-installed with a multi-language version of the Windows 2000 operating system. This model is noted as an obsolete part, suitable for maintenance and replacement in existing legacy systems.

Features

• 12-inch TFT color touch display
• Intel Celeron processor operating at 300 MHz
• 64 MB of installed RAM
• 40 GB internal hard drive for data and application storage
• Wide input voltage range of 115-230V AC
• Pre-installed with Windows 2000 (Multi-language: EN, GER, FR, IT, SP)
• Includes a U.S. mains power cable

Applications

• Machine-level operator control and monitoring
• Process visualization and data acquisition (SCADA)
• Industrial data logging and reporting
• Replacement HMI for legacy automation systems
• Factory floor information terminals

Technical Specifications

Installation Guidelines

1. 1 Prepare Mounting Location: Ensure the control panel or enclosure has a clean, flat, and appropriately sized cutout for the Panel PC. Verify that the mounting surface thickness is within the specified tolerance for the mounting clips.
2. 2 Install the Unit: Insert the Panel PC into the cutout from the front of the panel. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal and prevent bezel distortion.
3. 3 Connect Protective Earth (PE): Connect the chassis ground terminal to the control cabinet's protective earth bus bar using a low-impedance conductor. This is critical for both safety and noise immunity.
4. 4 Connect Power Supply: With the main power source de-energized, connect the provided 115-230V AC mains cable to the unit's power input connector. Ensure the source voltage matches the device's rating.
5. 5 Connect Peripherals and Network: Connect any required communication cables (e.g., Ethernet, serial) and peripherals (e.g., keyboard, mouse). Route all cables away from high-voltage lines to minimize electrical noise interference.
6. 6 Power On and Verify: After verifying all connections are secure and correct, remove the lockout/tagout and re-energize the main power source. Power on the Panel PC and confirm that the operating system boots correctly and the touch display is responsive.