Siemens 6AV7725-2BC10-0AD0 SIMATIC Panel PC 670

Description

This is a SIMATIC Panel PC 670 from Siemens, model 6AV7725-2BC10-0AD0, designed for industrial human-machine interface (HMI) and control applications. This standard configuration unit is equipped with a 15.1-inch color TFT display, a Pentium III 1.26 GHz processor, and 256 MB of SDRAM. It includes a 40 GB EIDE hard drive for data storage and a DVD-ROM drive. The system is powered by a 115-230V AC supply and comes pre-installed with the Windows 2000 multi-language operating system.

Features

• 15.1-inch Color TFT Display
• Intel Pentium III 1.26 GHz Processor
• 256 MB SDRAM-133 Memory (1 x 256 MB module)
• 40 GB EIDE Hard Disk Drive (HDD)
• Integrated DVD-ROM Optical Drive
• 115-230V AC Power Supply Unit
• Pre-installed Windows 2000 Operating System (Multi-language)

Applications

• Human-Machine Interface (HMI) for process visualization
• Supervisory Control and Data Acquisition (SCADA) client nodes
• Machine-level data logging and analysis
• Industrial control panel integration
• Factory automation and assembly line control

Technical Specifications

Installation Guidelines

1. 1 Prepare Enclosure: Ensure the panel cutout dimensions are correct for the PC 670 chassis. Verify that the mounting surface is flat, clean, and capable of supporting the unit's weight (12.00 kg).
2. 2 Mount the Unit: Carefully insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal.
3. 3 Establish Ground Connection: Connect a dedicated protective earth (PE) conductor to the designated grounding terminal on the PC chassis. This is critical for electrical safety and noise immunity.
4. 4 Connect Power: With the main power still off, connect the AC mains cable to the unit's power input. Ensure the source voltage (115-230V AC) matches the supply configuration. Route the power cable away from sensitive data lines.
5. 5 Connect Peripherals: Connect all required communication, USB, and video cables. Ensure all connectors are fully seated and secured. Maintain proper bend radii for all cabling to prevent damage.
6. 6 Final Checks and Power-Up: Verify all connections are secure and that there is adequate ventilation around the unit's heat sink. Remove all tools from the enclosure, close the panel door, and re-apply power to the cabinet.