Siemens 6AV7882-0DB50-2BA0 SIMATIC IPC277E Nanopanel PC

Description

This Siemens 6AV7882-0DB50-2BA0 is a SIMATIC IPC277E Nanopanel PC, a compact and robust human-machine interface (HMI) designed for machine-level control and visualization tasks. It features a 15-inch TFT touch display, an Intel Celeron N2930 processor, and is equipped with 4 GB of RAM with NVRAM for non-volatile data storage. The unit operates on a 24 V DC power supply and includes an 80 GB solid-state drive (SSD) pre-loaded with Windows Embedded Standard 7E. Connectivity is provided through dual Gigabit Ethernet ports, multiple USB interfaces including USB 3.0, a DisplayPort, and a serial port.

Features

• ■ 15-inch TFT resistive touch display for operator interaction.
• ■ Powered by an Intel Celeron N2930 processor (4 cores, 4 threads).
• ■ Equipped with 4 GB RAM and integrated NVRAM.
• ■ Includes an 80 GB Solid-State Drive (SSD) for storage.
• ■ Dual 10/100/1000 Mbps Ethernet ports for network connectivity.
• ■ Pre-installed with Windows Embedded Standard 7E SP1 (64-bit, English).
• ■ Front-accessible USB port for convenient peripheral connection.

Applications

• • Machine-level visualization and control
• • Data acquisition and logging in industrial environments
• • Process monitoring and operation in manufacturing plants
• • Compact control cabinet and panel-mount installations

Technical Specifications

Installation Guidelines

1. 1 De-energize the control cabinet and verify the absence of voltage using a calibrated multimeter. Apply LOTO devices as required.
2. 2 Verify the panel cutout dimensions match the IPC277E's mounting requirements. Ensure the mounting surface is clean, flat, and can support the unit's weight.
3. 3 Insert the Panel PC into the cutout and secure it evenly using all provided mounting clamps. Do not overtighten the clamps to avoid deforming the bezel.
4. 4 Connect the Protective Earth (PE) terminal on the unit to the cabinet's main ground bus using a low-impedance conductor. This is critical for safety and noise immunity.
5. 5 Connect the 24 V DC power supply to the designated power connector. Ensure correct polarity (+/-) is observed. Use appropriately sized wiring for the load.
6. 6 Connect Ethernet, USB, serial, and DisplayPort cables as required. Ensure all connectors are fully seated. Route cables to prevent strain and interference.
7. 7 Perform a final inspection of all connections. Remove LOTO devices and re-energize the cabinet to commission the Panel PC.