Siemens 6ES7647-7BA30-4QA0 SIMATIC IPC427C Microbox PC

Description

The Siemens 6ES7647-7BA30-4QA0 is a SIMATIC IPC427C Microbox PC, engineered for industrial control and data processing applications. This unit features a Celeron M 1.2 GHz processor with an 800 MHz Front Side Bus (FSB) and 1 MB Second Level Cache (SLC). It is equipped with 2 GByte DDR3 1066 SODIMM memory. For storage, the system includes an accessible 8 GB Compact-Flash drive and an internal, non-accessible 8 MB Compact-Flash drive primarily for diagnostics. While Windows Embedded Standard 2009 is preinstalled on the internal mass storage, the unit is delivered without the Embedded Windows software.

Features

• Processor: Celeron M 1.2 GHz, 800 MHz FSB, 1 MB SLC
• Memory: 2 GByte DDR3 1066 SODIMM
• Changeable Drive: 8 GB Compact-Flash (accessible)
• Internal Drive: 8 MB Compact-Flash (not accessible, for diagnostics)
• Operating System: Windows Embedded Standard 2009 (preinstalled on internal mass storage; delivered without Embedded Windows software)

Applications

The SIMATIC IPC427C Microbox PC is suitable for a range of industrial automation tasks, including:

• Machine control and visualization
• Data acquisition and processing
• Distributed control systems (DCS) support
• Human Machine Interface (HMI) applications
• Embedded control solutions in compact spaces

Technical Specifications

Installation Guidelines

Proper installation ensures reliable operation and longevity of the Microbox PC. Follow these general guidelines:

1. De-energize System: Before beginning any installation or wiring, ensure all power to the system and associated equipment is completely disconnected and locked out.
2. Mounting: Mount the Microbox PC in a suitable industrial enclosure or control cabinet that provides adequate ventilation and protection from environmental factors such such as dust, moisture, and excessive vibration.
3. Power Connection: Connect the power supply according to the specified voltage and current requirements. Ensure proper polarity and secure terminal connections.
4. Grounding: Establish a robust protective earth (PE) ground connection to the chassis of the Microbox PC to minimize electrical noise and ensure safety.
5. Cable Routing: Route power and signal cables separately to prevent interference. Use shielded cables for sensitive signals and ground the shield at one end.
6. Environmental Considerations: Ensure the operating environment adheres to the specified temperature and humidity ranges. Provide sufficient clearance around the unit for airflow.
7. Initial Power-Up: After all connections are secure, apply power and observe system startup. Verify proper boot sequence and indicator lights.