Siemens 6ES7660-0DC13-2BA0 SIMATIC IPC547C Industrial Workstation

Description

The Siemens 6ES7660-0DC13-2BA0 is a SIMATIC IPC547C industrial workstation designed for use as an OS Server within a SIMATIC PCS7 environment. This unit is equipped with an Intel Core 2 Duo E8400 processor, 2.0 GB of DDR2 SDRAM, and a redundant storage configuration. It comes pre-installed with SIMATIC PCS7 V7.1 SP3 software on a Windows Server 2003 Standard Edition operating system, making it a ready-to-deploy component for process control applications. The system includes an industrial-grade power supply and a European power cable.

Features

• Processor: Intel Core 2 Duo E8400 (3.0 GHz, 1333 MHz FSB, 6 MB L2 Cache)
• Memory: 2.0 GB DDR2 SDRAM (configured as 2 x 1.0 GB modules)
• Storage: RAID1 configuration with two 250 GB SATA hard disk drives for data redundancy
• Optical Drive: DVD+/-RW drive for software installation and data backup
• Legacy Support: Includes a Floppy Disk Drive (FDD)
• Pre-installed Software: SIMATIC PCS7 V7.1 with Service Pack 3
• Operating System: Windows Server 2003 Standard Edition with 5 Client Access Licenses (CALs)
• Power Supply: 110/230 V industrial power supply unit

Applications

• Process Control Systems (PCS)
• Supervisory Control and Data Acquisition (SCADA) servers
• Human-Machine Interface (HMI) server stations
• Industrial data logging and archiving
• Engineering and configuration workstations

Technical Specifications

Installation Guidelines

1. 1 Site Preparation: Verify the installation environment is within the specified operating temperature and humidity ranges. Ensure the 19-inch rack has adequate clearance for airflow and cable management.
2. 2 ESD Precautions: Use an anti-static wrist strap connected to a verified earth ground point before handling the IPC. Electrostatic discharge can damage sensitive internal components.
3. 3 Mounting: Securely install the IPC into the rack using all provided mounting points and appropriate hardware. Ensure the unit is level and fully supported by the rack rails.
4. 4 Grounding: Connect the chassis grounding terminal to the cabinet's protective earth (PE) bus bar using a low-impedance conductor. This is critical for both safety and noise immunity.
5. 5 Connections: Connect all required peripherals, such as monitors, keyboards, and network cables. Ensure all connectors are fully seated and secured.
6. 6 Power Up: After verifying all connections, connect the power cord to a suitable, protected power source. Power on the unit and verify that the operating system boots correctly.