Manufacturer: ABB
Product No.: SDCS-POW-1C
Country of origin:Finland,Saudi Arabia
Product Type: DC Power Supply Board
Barcode: 85049090
Payment: T/T, Western Union
Weight: 440g
Dimensions: 260 mm x 180 mm x 55 mm
Shipping port: Xiamen
Warranty: 12 months
The ABB SDCS-POW-1 is an internal auxiliary power supply module engineered specifically for integration within the electronics assembly of DCS 500 industrial DC drive systems. Acting as a dedicated power supply board, this card handles the critical conversion and regulation of baseline internal operating voltages required by main controller processors, diagnostic logic circuitry, and interface extension options.
To maintain stable operation under volatile heavy industrial load fluctuations, the board utilizes highly isolated multi-channel regulation paths that buffer delicate microelectronics from harmonic feedback and line notches native to high-power thyristor networks. This module is supplied exclusively as a conformally coated version (original part number 64162993), providing advanced resistance against atmospheric impurities, humidity, and fine particulate contamination common in harsh automation control environments.
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Model Designation | SDCS-POW-1 |
| Product ID | 10012279 |
| Coated Factory Part Number | 64162993 |
| Replacement Product ID (New) | 42000553 |
| Device Classification | Power Supply Board |
| System Usage Hierarchy | DCS 500 Modules |
| Part Type Status | Original / New |
| Country of Origin | Finland (FI) / Saudi Arabia (SA) |
| Customs Tariff Number | 85049090 |
| Product Net Weight | 0.44 kg |
| Shipping Weight (Calculated) | 0.95 kg |
| Package Dimensions (Calculated) | 260 mm x 180 mm x 55 mm |
The SDCS-POW-1 auxiliary power card under Product ID 10012279 maps directly to the active factory lifecycle tracking code 42000553. When retrofitting legacy DCS 500 configurations, ensure that older non-coated variants are phased out in favor of the factory standard 64162993 coated assembly to protect control signals from premature structural breakdowns.
CRITICAL WARNING: HIGH VOLTAGE RISK
Isolate all incoming main line three-phase power feeds and independent auxiliary supplies servicing the drive enclosure before opening the electronics tray. Wait a minimum of 15 minutes for internal bus capacitors to bleed off residual charges. Verify a zero-voltage state with a certified multi-meter at all testing junctions before initiating board extraction.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Finland
Saudi Arabia
|
A field-ready guide to Logix produced and consumed tags, covering data contracts, RPI selection, connection status, stale-data handling, commissioning and controller-to-controller troubleshooting.
A practical AS-Interface commissioning method covering topology, power and voltage-drop checks, addressing, PLC mapping, fault tests and maintenance records for reliable actuator-sensor networks.
Learn how line reactors, harmonic filters, output reactors, dV/dt filters, and sine filters address different VFD power-quality and motor-cable problems—and how to select them safely.
Learn how light-on and dark-on photoelectric sensor modes interact with through-beam, retroreflective, and diffuse sensing, PNP/NPN wiring, PLC logic, commissioning, and fault detection.
A practical guide to H-bridge motor drives covering switching states, dead time, inductive current paths, PWM choices, protection, PCB layout, PLC interfacing, and staged commissioning tests.
Learn how Mitsubishi FX PLC STL and RET instructions structure conveyor and pneumatic sequences, with practical state design, transition logic, timeouts, diagnostics, and safe restart boundaries.
