BECKHOFF CP2924-0010 Multi-touch built-in Control Panel with CP-Link 4

Description

The BECKHOFF CP2924-0010 is a multi-touch built-in Control Panel featuring the CP-Link 4 interface, designed for industrial automation environments where high-resolution operator control and visualization are required. As part of the CP29xx series, this panel integrates a multi-finger touch screen and an aluminum housing with a glass front, ensuring robust construction for flush installation in control cabinets or operator consoles.

This control panel utilizes CP-Link 4, the One Cable Display Link technology from BECKHOFF, which transmits DVI and USB 2.0 signals at 100 Mbit/s over a distance of up to 100 meters using a single Cat.6A cable. The connection supports either an integrated or separate 24 V DC power supply depending on the corresponding transmitter module configuration.

Features

• 24-inch multi-finger touch screen display with a resolution of 1920 x 1080 pixels
• CP-Link 4 interface for combined DVI, USB 2.0, and power transmission via a single Cat.6A cable up to 100 m
• Aluminum housing with an all-glass front and continuous design
• Front-side IP65 protection rating and rear-side IP20 protection
• Integrated pull-out clamping levers for fast, tool-assisted installation without loose parts
• Two USB 2.0 ports and one front USB port for peripheral connectivity

Applications

• Machine tool automation and operator interfaces
• Industrial plant visualization and SCADA systems
• Production line monitoring and control stations
• HMI applications requiring long-distance panel placement from the industrial PC

Technical Specifications

General

Electrical and Communication

Mechanical and Environmental

Installation Guidelines

1. Verify that the BECKHOFF CP2924-0010 model number matches your system design requirements before beginning installation.
2. Ensure all power sources to the control cabinet and the remote PC transmitter module are de-energized and locked out.
3. Prepare the panel cutout in the mounting surface according to the mechanical dimension specifications for the 24-inch built-in unit.
4. Insert the control panel into the cutout from the front, ensuring the front gasket seats evenly against the mounting surface to maintain the IP65 seal.
5. Secure the unit from the rear using the integrated pull-out clamping levers, tightening them evenly to avoid twisting the aluminum housing.
6. Connect the Cat.6A cable from the CP29-series transmitter module to the RJ45 CP-Link 4 port on the rear of the panel.
7. Verify the 24 V DC power supply connections and check all wiring before re-energizing the system.