BECKHOFF CP3919-0000 Multi-touch Control Panel

Description

The BECKHOFF CP3919-0000 is a high-performance industrial multi-touch Control Panel designed for space-saving mounting arm installation. It features a high-quality 19-inch display with a resolution of 1280 x 1024 pixels, enclosed in a durable aluminum housing with a protective glass front. Operating as a remote operator interface, it acts as the primary visualization and control unit directly at the machine or process line.

Equipped with integrated DVI-E and USB-E 2.0 connection technology, the BECKHOFF CP3919-0000 transmits high-resolution video signals and high-speed USB data up to 50 meters away from the control PC. The DVI-E input remains compatible with standard DVI output ports on industrial PCs, while the USB-E 2.0 interface supports reliable peripheral communication at speeds up to 480 Mbit/s. This allows remote placement of the control PC in a secure electrical cabinet while keeping the interface at the machine level.

For industrial deployment, this Control Panel is engineered with an all-round IP65 protection rating, securing the electronics, display, and IP65-rated connectors against dust, moisture, and water jets. Its mechanical interface features an integrated, highly adjustable mounting arm adapter block designed for standard 48 mm tubes, allowing the operator panel to be rotated and tilted to achieve optimal viewing angles.

Features

• 19-inch display with 1280 x 1024 resolution and protective physical glass front
• Projected capacitive multi-touch technology supporting multi-finger operation
• DVI-E and USB-E 2.0 interfaces for operation at distances up to 50 meters
• All-round IP65 protection rating for reliable use in wet and dusty process environments
• Integrated mounting arm adapter for 48 mm tubes with rotatable and tiltable physical adjustment
• Flexible mechanical options enabling mounting from either the top or bottom

Applications

• Machine-level operator control and process visualization
• HMI applications in packaging, assembly, and automated production systems
• Distributed industrial control systems where PC hardware is isolated from the operator area
• Automated materials handling and tracking visualization

Technical Specifications

General

Display and Touch

Electrical and Interfaces

Mechanical and Environmental

Connections / Interfaces

Installation Guidelines

1. Verify that the hardware model on the label matches the installation requirements and specification sheets.
2. Ensure that all power supply sources are completely de-energized before mounting or wiring the device.
3. Position the unit on the designated 48 mm mounting arm tube using the integrated adapter block, configuring for top or bottom entry as required by the workstation layout.
4. Securely tighten the mounting hardware, verifying that the rotation and tilt mechanisms are set to the correct mechanical resistance.
5. Route the DVI-E and USB-E cables through the arm, ensuring there are no sharp bends or stress points. Keep connections within the maximum supported distance of 50 meters.
6. Verify that the IP65 seal and connector covers are aligned and fully seated to maintain environmental integrity.
7. Connect the 24 V DC supply to the power input and perform a startup check on the display and touch calibration within the host operating system.

Replacement Recommendations

• When replacing a unit, isolate and switch off the 24 V DC power supply before removing any connections.
• Disconnect the DVI-E and USB-E cables carefully to prevent physical damage to the specialized IP65 connector housings.
• Retain the mechanical hardware and adapter plates from the original installation to assist in mounting the replacement.
• Ensure the replacement device matches the CP3919-0000 configuration to ensure driver compatibility and correct touch calibration without system modification.