BECKHOFF CP6522-0002-0080 Built-in Panel PC

Description

The BECKHOFF CP6522-0002-0080 is an industrial Built-in Panel PC designed for mounting directly into the doors of control cabinets or control desks. It features an integrated 15-inch TFT display with a resolution of 1024 x 768 pixels, delivering clear visual output for machine monitoring and human-machine interface (HMI) tasks. This unit merges industrial display technology with a rear-mounted ATX motherboard housing, providing stable processing capacity and hardware expandability inside a single system.

Engineered for harsh manufacturing environments, the front side of the BECKHOFF CP6522-0002-0080 front panel offers IP65 ingress protection, shielding it from dust and water spray. The rear-facing portion consists of a 7-slot ATX housing rated at IP20, which remains protected inside the control enclosure. Secure physical installation is achieved using integrated pull-out clamping levers that allow rapid mounting without the risk of loose mechanical parts falling into the cabinet.

The internal architecture supports industrial PC motherboards with built-in networking interfaces, multiple USB ports, and expandable PCI/PCIe slots. This design allows users to integrate functional communication interface cards, hardware fieldbus modules, and various storage solutions depending on specific application requirements.

Features

• Integrated 15-inch active display with a native resolution of 1024 x 768 pixels.
• Industrial front panel design with front-side IP65 ingress protection.
• 7-slot ATX housing with rear-side IP20 protection.
• Fast control cabinet mounting via integrated pull-out clamping levers.
• Wide operational temperature range supporting continuous ambient operations from 0 to 55 degC.
• Onboard dual Gigabit Ethernet ports for network connectivity.

Applications

• Control cabinet HMI and visualization terminals.
• Machine-level controller interfaces in automated manufacturing.
• Process monitoring and industrial data acquisition systems.
• Assembly line visualization and supervisory control.

Technical Specifications

Installation Guidelines

1. Verify that the product model CP6522-0002-0080 matches your hardware project documentation.
2. Isolate and de-energize all electrical supplies to the control enclosure before performing the installation.
3. Prepare the panel cutout according to the official dimension drawings for the 15-inch front panel.
4. Insert the Built-in Panel PC into the cutout from the front, ensuring the perimeter gasket is seated correctly.
5. From the rear of the panel, secure the housing in place using the built-in pull-out clamping levers. Do not use excessive force.
6. Connect the ground/PE conductor to the designated earth terminal on the metal chassis.
7. Connect power, communication, and interface cables before applying system voltage.