The BECKHOFF IP5009-B400 is an Interbus-compatible Fieldbus Box module designed to establish a direct connection to absolute SSI encoders. Acting as a single-channel sensor interface, this module reads physical position information from absolute sensors and transmits the data directly to the higher-level Interbus system. Encased in a rugged polyamide XXL housing, this unit is engineered for direct installation on machinery and equipment, eliminating the need for a separate electrical enclosure.
The module is equipped with a high-speed RS485 difference signal interface capable of processing adjustable serial input lengths. Connection terminals include standardized M23 circular connectors for the absolute encoder and the Interbus network, coupled with compact M8 connectors for power routing. These robust physical connections ensure reliable communication and high ingress protection in industrial automation environments.
| Parameter | Specification |
|---|---|
| Manufacturer | BECKHOFF |
| Model | IP5009-B400 |
| Product Type | Fieldbus Box |
| Housing Material | PA6 (Polyamide) |
| Dimensions (W x H x D) | 30 mm x 210 mm x 26.5 mm |
| Weight | Approx. 350 g |
| Installation Mounting | 2 x 3.5 mm diameter fixing holes for M3 screws |
| Parameter | Specification |
|---|---|
| Nominal Voltage | 24 V DC (-15% / +20%) |
| Control Voltage Supply | 24 V DC (20...29 V DC) |
| Box Supply Current | 85 mA + sensor current consumption (max. 0.5 A) |
| Sensor Supply | From control voltage, max. 0.5 A, short-circuit proof |
| Encoder Supply | 24 V DC, from load voltage |
| Power Supply Connection | Feed: 1 x M8 male socket (4-pin); Downstream: 1 x M8 female socket (4-pin) |
| Parameter | Specification |
|---|---|
| Fieldbus System | Interbus |
| Bus Interface | 1 x M23 female socket (9-pin), 1 x M23 male socket (9-pin) |
| Data Transfer Rate (Bus) | 500 kBaud |
| Number of I/O Stations | Dependent on the master (max. 256) |
| Data Transfer Medium | LiYCY 3 x 2 x 0.22 mm² cable |
| Cable Length | Max. 400 m between modules |
| Parameter | Specification |
|---|---|
| Number of Channels | 1 |
| SSI Encoder Connection | M23 connector with outer thread, 12-pin |
| Signal Input | Difference signal (RS485) |
| SSI Data Transfer Rates | Variable up to 1 MHz (250 kHz default) |
| Serial Input | 24 bits (adjustable) |
| Data Direction | Read |
| Process Image Bit Width | Input: 1 x 32-bit data (optional 1 x 8-bit control/status) |
| Parameter | Specification |
|---|---|
| Operating Temperature | 0 to +55 degC |
| Storage Temperature | -25 to +85 degC |
| Protection Class | IP65/66/67 (conforms to EN 60529) |
| Vibration and Shock Resistance | Conforms to EN 60068-2-6 / EN 60068-2-27 |
| EMC Immunity and Emission | Conforms to EN 61000-6-2 / EN 61000-6-4 |
To configure operational parameters such as the SSI transfer rate or serial input bit width, connect the BECKHOFF IP5009-B400 to a PC running the BECKHOFF KS2000 configuration software tool. Within the software interface, you can adjust the process image mapping and set the module properties according to the exact specifications of the connected absolute encoder.
Global Express Shipping
Returns & Warranty
Manufacturer: BECKHOFF
Product No.: IP5009-B400
Country of origin:Germany
Product Type: Fieldbus Boxes
Payment: T/T, Western Union
Weight: 350g
Dimensions: 30 mm x 210 mm x 26.5 mm
Shipping port: Xiamen
Warranty: 12 months
The BECKHOFF IP5009-B400 is an Interbus-compatible Fieldbus Box module designed to establish a direct connection to absolute SSI encoders. Acting as a single-channel sensor interface, this module reads physical position information from absolute sensors and transmits the data directly to the higher-level Interbus system. Encased in a rugged polyamide XXL housing, this unit is engineered for direct installation on machinery and equipment, eliminating the need for a separate electrical enclosure.
The module is equipped with a high-speed RS485 difference signal interface capable of processing adjustable serial input lengths. Connection terminals include standardized M23 circular connectors for the absolute encoder and the Interbus network, coupled with compact M8 connectors for power routing. These robust physical connections ensure reliable communication and high ingress protection in industrial automation environments.
| Parameter | Specification |
|---|---|
| Manufacturer | BECKHOFF |
| Model | IP5009-B400 |
| Product Type | Fieldbus Box |
| Housing Material | PA6 (Polyamide) |
| Dimensions (W x H x D) | 30 mm x 210 mm x 26.5 mm |
| Weight | Approx. 350 g |
| Installation Mounting | 2 x 3.5 mm diameter fixing holes for M3 screws |
| Parameter | Specification |
|---|---|
| Nominal Voltage | 24 V DC (-15% / +20%) |
| Control Voltage Supply | 24 V DC (20...29 V DC) |
| Box Supply Current | 85 mA + sensor current consumption (max. 0.5 A) |
| Sensor Supply | From control voltage, max. 0.5 A, short-circuit proof |
| Encoder Supply | 24 V DC, from load voltage |
| Power Supply Connection | Feed: 1 x M8 male socket (4-pin); Downstream: 1 x M8 female socket (4-pin) |
| Parameter | Specification |
|---|---|
| Fieldbus System | Interbus |
| Bus Interface | 1 x M23 female socket (9-pin), 1 x M23 male socket (9-pin) |
| Data Transfer Rate (Bus) | 500 kBaud |
| Number of I/O Stations | Dependent on the master (max. 256) |
| Data Transfer Medium | LiYCY 3 x 2 x 0.22 mm² cable |
| Cable Length | Max. 400 m between modules |
| Parameter | Specification |
|---|---|
| Number of Channels | 1 |
| SSI Encoder Connection | M23 connector with outer thread, 12-pin |
| Signal Input | Difference signal (RS485) |
| SSI Data Transfer Rates | Variable up to 1 MHz (250 kHz default) |
| Serial Input | 24 bits (adjustable) |
| Data Direction | Read |
| Process Image Bit Width | Input: 1 x 32-bit data (optional 1 x 8-bit control/status) |
| Parameter | Specification |
|---|---|
| Operating Temperature | 0 to +55 degC |
| Storage Temperature | -25 to +85 degC |
| Protection Class | IP65/66/67 (conforms to EN 60529) |
| Vibration and Shock Resistance | Conforms to EN 60068-2-6 / EN 60068-2-27 |
| EMC Immunity and Emission | Conforms to EN 61000-6-2 / EN 61000-6-4 |
To configure operational parameters such as the SSI transfer rate or serial input bit width, connect the BECKHOFF IP5009-B400 to a PC running the BECKHOFF KS2000 configuration software tool. Within the software interface, you can adjust the process image mapping and set the module properties according to the exact specifications of the connected absolute encoder.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
