Bently Nevada 190501-02-00-04 Velomitor CT Velocity Transducer

Only 2 item(s) left in stock

Manufacturer: Bently Nevada
Product No.: 190501-02-00-04
Country of origin:United States
Product Type: Velomitor CT Velocity Transducer
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 297g
Dimensions: 3.6cm x 3.1cm x 10cm
Shipping port: Xiamen
Warranty: 12 months

View full details

Description

The 190501-02-00-04 Velomitor CT Velocity Transducer is a specialized, low-frequency sensor engineered to measure casing vibration velocity on cooling tower and air-cooled heat-exchanger fan assemblies. This configuration features a 3/8-in 24 to 1/2-in 20 mounting stud (Option 02), a standard MIL-C-5015 connection interface (Option 00), and no hazardous area approvals (Option 04). Designed specifically for machinery operating at or above 90 rpm, this piezo-velocity sensor effectively monitors vibration amplitudes generated by the fan motor and speed reducer. It provides critical data for detecting common machine malfunctions such as unbalance and misalignment. For effective machine protection, the transducer should be installed on the bearing housing or machine casing to ensure accurate transmission of rotor vibration to the sensor.

Features

Designed for low-frequency vibration monitoring (100 to 300 rpm typical)
Option 02 mounting: 3/8-in 24 to 1/2-in 20 stud for robust attachment
Option 00 connection: Standard MIL-C-5015 2-pin interface
Option 04: Standard configuration for non-hazardous application environments
316L stainless steel case material for durability in industrial conditions
Output: 100 mV/in/s (3.94 mV/mm/s) sensitivity
Internal electronics isolated from case to prevent ground loops

Applications

Cooling tower fan assemblies
Air-cooled heat exchanger fans
Low-speed rotating machinery vibration monitoring
General casing vibration measurement in industrial environments

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	190501-02-00-04	Velomitor CT Velocity Transducer
A - Mounting Hardware	02	Stud 3/8-in 24 to 1/2-in 20
B - Connection	00	MIL-C-5015 connection interface
C - Agency Approval	04	CSA/NRTL/C (Class I, Div 1), ATEX/IECEx (Class I, Zone 0/1)

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Part Number	190501-02-00-04
Sensitivity	3.94 mV/mm/s (100 mV/in/s) +/- 5%
Frequency Response	3.0 Hz to 900 Hz (+/- 1.0 dB); 1.5 Hz to 1.0 kHz (+/- 3.0 dB)
Velocity Range	63.5 mm/s pk (2.5 in/s pk)
Operating Temperature	-40 degC to +85 degC
Case Material	316L stainless steel
Connector	2-pin 316L stainless steel MIL-C-5015, top
Weight	< 297 g (10.5 oz) typical
Mounting Torque	4.5 N-m +/- 0.6 N-m (40 in-lbf +/- 5 in-lbf)

Installation Guidelines

Install transducer directly on the bearing housing or machine casing for optimal signal response.
Ensure the mounting surface is clean and flat; use the supplied mounting stud (Option 02) to secure the sensor.
Tighten mounting to 4.5 N-m (40 in-lbf) to maintain frequency response.
Avoid installation in locations that may cause false signals; ensure cable routing minimizes interference.
Compatible with standard MIL-C-5015 interface cables.

Compliance and Certifications

CE Compliant
RoHS Directive 2011/65/EU
EMC Directive 2014/30/EU
Hazardous Area Approvals (Option 04): CSA/NRTL/C (Class I, Div 1), ATEX/IECEx (Class I, Zone 0/1)

Key Features:

#Velocity Transducer

Product Documentation

Technical Datasheet (PDF) Complete specifications and technical drawings.

What is the primary application for the 190501 Velomitor CT?

The Velomitor CT is specifically designed for measuring casing vibration velocity on cooling tower and air-cooled heat-exchanger fan assemblies operating at 90 rpm or higher.

What does the -02 option code represent in the mounting hardware?

The -02 option code indicates that the transducer is supplied with a 3/8-in 24 to 1/2-in 20 mounting stud.

Can this sensor be used in hazardous environments?

Yes, this specific SKU (-04 approval option) is rated for CSA/NRTL/C Class I, Division 1 and ATEX/IECEx Class I, Zone 0/1 hazardous areas.

What is the standard sensitivity of this transducer?

The Velomitor CT transducer provides a sensitivity of 100 mV/in/s (3.94 mV/mm/s) with a +/- 5% tolerance.

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .

TECHNICAL SPECIFICATIONS

Country of origin

Technical knowledge

Why Maintenance Data Is Essential for Industrial Reliability

Maintenance data connects work orders, sensor signals, asset history, costs, and technician knowledge. Used well, it improves planning, reliability, predictive maintenance, spare-parts control, and...

July 15, 2026

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Electric Actuators Designed to Replace Fluid Power Systems: A Practical Industrial Automation Guide

This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...

June 23, 2026

$Math Operations Using OpenPLC for Industrial Automation Applications$

Bently Nevada 190501-02-00-04 Velomitor CT Velocity Transducer