Bently Nevada 330101-00-14-10-02-00 3300 XL 8 mm Proximity Probe

Description

330101-00-14-10-02-00 is a 3300 XL 8 mm proximity probe featuring a 3/8-24 UNF threaded body. This configuration includes Option 00 (0.0 in unthreaded length) and Option 14 (1.4 in case length) with a 1.0 meter (3.3 feet) total system length (Option 10). It is equipped with a miniature coaxial ClickLoc connector and standard cabling (Option 02), with no agency approvals (Option 00) required for this specific build.

This probe is a critical component of the 3300 XL 8 mm proximity transducer system, designed for non-contact measurement of shaft vibration and axial position on rotating machinery. The 3300 XL system is engineered for interchangeability and high-precision monitoring, providing a linear output proportional to the gap between the probe tip and the observed conductive surface.

Features

• Probe type: 3300 XL 8 mm proximity probe
• Thread: 3/8-24 UNF
• Unthreaded length: 0.0 in (Option 00)
• Case length: 1.4 in (Option 14)
• Total length: 1.0 m (Option 10)
• Connector/Cable: Miniature coaxial ClickLoc connector, standard cable (Option 02)
• Agency Approval: Not required (Option 00)
• Construction: Without armor (standard 330101 configuration)

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Radial vibration detection on rotating equipment
• Bearing wear and position monitoring in critical industrial machinery

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed with the correct gap for the desired linear range. The 3300 XL system requires the probe, extension cable, and Proximitor sensor to be matched in total system length (1.0 m, 5.0 m, or 9.0 m). Verify that the probe is securely mounted in the housing using the appropriate bracket and that the cable is properly routed and protected from mechanical stress or abrasion. Ensure connectors are clean and fully engaged to maintain signal integrity.