Bently Nevada 330102-00-20-10-01-05 3300 XL 8 mm Proximity Probe

Description

The 330102-00-20-10-01-05 is a 3300 XL 8 mm proximity probe configuration featuring a 3/8-24 UNF threaded steel body with protective armor, 0.0 in unthreaded length (Option 00), 2.0 in case length (Option 20), and a 1.0 m total system length (Option 10). This probe includes the Miniature coaxial ClickLoc connector with a connector protector (Option 01) and holds CSA, ATEX, and IECEx hazardous area approvals (Option 05).

Designed for use within 3300 XL 8 mm proximity transducer systems, this probe utilizes non-contact eddy-current technology to provide precise displacement measurement. The integrated armor provides mechanical protection for the probe cable in harsh industrial environments, while the ClickLoc connector ensures a secure, reliable connection to the extension cable. This unit is fully compatible with 3300 XL Proximitor sensors and extension cables, facilitating accurate monitoring of shaft vibration and axial position on rotating machinery such as turbines, compressors, and large motors.

Features

• 3/8-24 UNF threaded probe body with stainless steel construction and integral armor
• Option 00: 0.0 in unthreaded length
• Option 20: 2.0 in case length
• Option 10: 1.0 m total system length (probe and cable)
• Option 01: Miniature coaxial ClickLoc connector with connector protector
• Option 05: CSA, ATEX, and IECEx hazardous area approvals
• Compatible with 3300 XL 8 mm Proximitor sensors and extension cables

Applications

• Radial vibration and axial position monitoring on critical rotating machinery
• Power generation equipment, including steam and gas turbines
• Oil and gas compressors and pumps
• Industrial motors and gearboxes requiring non-contact displacement measurement
• High-abrasion environments where armored cabling is required

Ordering Information

Technical Specifications

Installation Guidelines

Probes should be installed using the appropriate mounting bracket (aluminum or phenolic) to ensure proper spacing and electrical isolation if required. The probe tip must be gapped according to the specific machinery requirements, typically 1.27 mm (50 mil) for standard vibration monitoring. Ensure the armored cable is routed away from high-temperature zones and secured to prevent vibration-induced fatigue. Connector protectors should be fully engaged to prevent moisture and contaminant ingress.