Bently Nevada 330102-00-28-05-02-00 3300 XL 8 mm Proximity Probe

Description

The 330102-00-28-05-02-00 is an armored 3300 XL 8 mm Proximity Probe configured for non-contact eddy-current displacement measurements in critical machinery. This specific variant features a 0.0 in unthreaded length (Option 00), 2.8 in case length (Option 28), and a 0.5 m total probe length (Option 05) with a standard miniature coaxial ClickLoc connector (Option 02). The armored design provides mechanical protection for the probe cable, making it suitable for industrial environments where abrasion or physical hazards are a concern.

This probe is a primary component of the 3300 XL 8 mm transducer system, designed to work in conjunction with the 3300 XL Proximitor sensor and 3300 XL extension cable. It delivers precise shaft vibration and axial position data, critical for monitoring rotating machinery such as turbines, compressors, and pumps.

Features

• Armored probe construction for enhanced mechanical protection
• 3/8-24 UNF thread size
• 0.0 in unthreaded length (Option 00)
• 2.8 in case length (Option 28)
• 0.5 m total length (Option 05)
• Miniature coaxial ClickLoc connector (Option 02)
• Compatible with standard 3300 XL 5 m Proximitor sensor systems
• Gold-plated brass connectors ensure reliable electrical connection

Applications

• Radial vibration and thrust position measurement
• Critical rotating machinery protection
• Oil and gas upstream and downstream processing
• Power generation turbine and compressor monitoring
• High-abrasion or heavy-duty industrial environments requiring armored cabling

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the system manual for the specific machinery application. Use the appropriate mounting bracket (standard or threaded) to secure the probe. When routing the armored cable, observe the minimum bend radius of 25.4 mm (1.0 in) to prevent damage. Connectors should be tightened finger-tight; do not use excessive torque. Verify that the combined length of the probe and extension cable matches the calibrated length for the connected Proximitor sensor.