Bently Nevada 330104-00-05-10-12-05 3300 XL 8 mm Proximity Probe

Description

The 330104-00-05-10-12-05 is a 3300 XL 8 mm proximity probe featuring an M10 x 1 threaded case with integrated armor for mechanical protection. This configuration includes a 50 mm case length (Option 05) and 0 mm unthreaded length (Option 00), optimized for systems requiring a 1.0 m total system length (Option 10). The probe is equipped with a miniature coaxial ClickLoc connector and FluidLoc cable (Option 12) to mitigate fluid ingress, making it suitable for demanding industrial environments requiring robust sealing.

Designed for integration into 3300 XL monitoring chains, this transducer system provides non-contact measurement of shaft vibration and axial position on critical rotating machinery. This specific unit carries Option 05 certification, ensuring compliance with CSA, ATEX, and IECEx hazardous area requirements.

Features

• M10 x 1 probe thread with integrated armor for enhanced mechanical durability
• 1.0 m total length configured for standard 3300 XL monitoring chains
• FluidLoc cable construction (Option 12) prevents process fluid migration through the cable
• Miniature coaxial ClickLoc connector ensures secure electrical termination
• Agency Approvals: CSA, ATEX, IECEx (Option 05)
• Compatible with 3300 XL 8 mm series Proximitor sensors and extension cables

Applications

• Critical machinery protection for turbines, compressors, and pumps
• Shaft vibration and axial position measurement
• Hazardous area environments (Oil and Gas, Petrochemical)
• Installations requiring fluid-tight cable sealing

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that the probe gap is set according to the 3300 XL monitoring system manual to maintain linear range. Use the appropriate mounting bracket (ordered separately) to secure the probe and protect against vibration. When routing cables, ensure the total system length (probe + extension cable) matches the calibrated length of the Proximitor sensor. Protect all connectors using connector protectors if the installation environment exposes the system to moisture or contaminants.

Compliance and Certifications

This product is certified for use in hazardous areas under CSA, ATEX, and IECEx standards (Option 05). Ensure the installation adheres to local electrical codes and the specific hazardous area classification of the facility.