Bently Nevada 330104-13-20-10-02-05 3300 XL 8 mm Proximity Probe

Description

330104-13-20-10-02-05 is a 3300 XL 8 mm proximity probe configuration featuring an M10 x 1 threaded body with integrated armor for mechanical protection. This specific model includes a 130 mm unthreaded length (Option 13) and a 200 mm total case length (Option 20). It provides a 1.0 m total system length (Option 10) and is equipped with a miniature ClickLoc coaxial connector without a connector protector (Option 02). This unit is certified for use in hazardous environments, including CSA, ATEX, and IECEx locations (Option 05).

As part of the 3300 XL 8 mm proximity transducer system, this probe is designed for non-contact eddy-current displacement measurement, making it ideal for monitoring shaft vibration and axial position on critical rotating machinery such as turbines and compressors. The system is fully compatible with 3300 XL Proximitor sensors and extension cables, ensuring high-accuracy signal transmission in demanding industrial applications.

Features

• M10 x 1 threaded stainless steel probe body with integral armor (Option 13/20).
• Miniature ClickLoc coaxial connector (Option 02).
• 1.0 meter total system length (Option 10).
• Hazardous area approvals: CSA, ATEX, and IECEx (Option 05).
• Designed for seamless integration into 3300 XL monitoring chains.
• Consistent, repeatable non-contact displacement measurement for vibration and position.

Applications

• Turbine and generator shaft vibration monitoring.
• Compressor rotor axial position measurement.
• Critical rotating machinery protection in oil and gas, power generation, and petrochemical facilities.
• Industrial environments requiring hazardous area compliance.

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the total system length (probe + extension cable) matches the Proximitor sensor's calibrated length requirement.
• Use the provided mounting brackets (ordered separately) to ensure proper positioning and electrical isolation if required.
• Ensure the probe tip is installed at the correct gap distance according to the transducer system manual.
• Protect all connectors using recommended connector protectors in environments where contamination or moisture may be present.
• Follow all local hazardous area regulations and guidelines for cable routing and installation.

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmospheres Explosibles)
• IECEx (International Electrotechnical Commission Explosive)