Manufacturer: General Electric
Product No.: IC697CPX935
Country of origin:United States
Product Type: Central Processing Unit
Payment: T/T, Western Union
Weight: 1000g
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC697CPX935 is a single-slot, 96 MHz Series 90-70 central processing unit with 32-bit floating-point execution, 1 Mbyte of battery-backed fast CMOS user memory, and 256 Kbytes of optional non-volatile user flash memory. The CPU installs in slot 1 of rack 0 and communicates with Series 90-70 I/O and option modules through the rack backplane.
This is the fast-memory 1 Mbyte CPX model. Do not select it only by front-panel appearance: record the complete catalog number, hardware suffix, firmware release, user-memory image, rack configuration, serial-port use, and installed option modules before replacement.
| Parameter | IC697CPX935 specification |
|---|---|
| Manufacturer | GE Fanuc Automation |
| Product family | Series 90-70 |
| Product type | Central processing unit (CPU) |
| Catalog number | IC697CPX935 |
| Rack position | Single slot; slot 1 in rack 0 |
| Processor | 96 MHz 80486DX4, 32-bit, floating point |
| User RAM | 1 Mbyte battery-backed fast CMOS RAM |
| User flash | 256 Kbytes built-in non-volatile flash; optional for program, configuration, and register data |
| Discrete I/O capacity | 12K inputs and outputs, any mix |
| Analog I/O capacity | Up to 8K analog I/O |
| Boolean execution | 0.4 microseconds per Boolean function |
| Backplane power | 3.1 A nominal from the 5 V bus |
| Backplane standard | VME C.1 system compatibility |
| Configuration | Software configured; no DIP switches or jumpers |
| Status and control | Seven green status LEDs, three-position RUN/STOP switch, and memory-protect keyswitch |
| Port | Electrical interface | Protocol notes |
|---|---|---|
| Port 1 | RS-232 compatible, 6-pin female RJ-11 | SNP Slave; Break-Free SNP supported from firmware release 8.00 |
| Port 2 | RS-485 compatible, isolated, 15-pin female D-connector | SNP Slave; Break-Free SNP supported from firmware release 8.00 |
| Port 3 | RS-485 compatible, non-isolated, 15-pin female D-connector | SNP Slave only |
The CPU datasheet lists no SNPX or RTU support on these three ports. Ethernet programming requires a separate IC697 Ethernet interface such as IC697CMM741 or IC697CMM742; the CPU does not provide an onboard Ethernet port.
| Parameter | Limit |
|---|---|
| Replacement battery | IC697ACC701 lithium battery |
| Battery shelf life | 5 years at 20°C (68°F) |
| Memory retention without rack power | 6 months nominal |
| Normal operating range | 0 to 50°C (32 to 122°F) at full rack power without forced air |
| Operation from 50 to 60°C | Use 70 CFM forced air for full rack power, or limit total rack power to 70 W without forced air |
| Time-of-day clock accuracy | 3.5 seconds per day maximum |
| Elapsed-time clock accuracy | 0.01% maximum |
Install the new battery before disconnecting the old battery. Turn rack power off before inserting or removing the CPU.
Historical Series 90-70 module listings place the enclosure at approximately 44 × 292 × 222 mm (width × height × depth). Some listings report 38 × 216 × 292 mm because the last two axes are presented in a different order and the face width is measured differently. Published weights also vary by measurement method. The current store logistics record is 1.0 kg.
For air-freight planning, use an estimated package size of 350 × 280 × 100 mm and an estimated gross weight of 1.3 kg. These are packing estimates, not OEM product specifications. Warehouse measurements and the final protective packaging take precedence.
| Item | Catalog number |
|---|---|
| 96 MHz Series 90-70 CPU, 1 Mbyte fast memory | IC697CPX935 |
| Replacement lithium battery | IC697ACC701 |
| 120 VAC rack fan assembly | IC697ACC721 |
| 240 VAC rack fan assembly | IC697ACC724 |
| 24 VDC rack fan assembly | IC697ACC744 |
The PRODUCT DOCUMENTATION section contains the IC697CPX935 datasheet. Compare the installed hardware suffix and firmware release with the site backup and maintenance records before commissioning a replacement.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
An engineering checklist for replacing an Allen-Bradley 1746-A7: verify chassis series, backplane loading, slot plan, interconnect cables, mounting, grounding and receiving condition.
A field replacement guide for GE Fanuc IC200MDL650 covering revision-dependent negative logic, four common groups, 24 VDC thresholds, input filtering, carrier checks and commissioning records.
A field-focused IC697CPX935 replacement guide covering fast memory, firmware-dependent serial behavior, rack power, cooling, I/O architecture and backup records.
A field-focused IC693DSM324 replacement guide covering Series 90-30 host checks, FSSB servo-chain records, 5 V power budget, firmware limits, follower control and commissioning.
A field-focused HIMA F3430 replacement guide covering relay contact ratings, DC load derating, fusing, F3330/F3331 differences, safety restrictions and commissioning records.
A field-focused IC697PWR710 replacement guide covering 5 V load calculations, dual-rack limits, extension cables, input checks, protection behavior and hardware revision risks.
