Providing channel-to-channel electrical isolation for enhanced noise immunity, the Mitsubishi Electric R60AD8-G is an 8-channel analog input module engineered for integration within the high-performance MELSEC iQ-R control architecture. This module enables the direct and precise acquisition of both voltage and current analog signals, safeguarding system integrity by preventing ground loops and signal cross-talk in electrically hostile industrial environments. With individual channel configuration and embedded signal processing functions, it delivers accurate process telemetry directly to the controller backplane.
| Manufacturer | Mitsubishi Electric |
| Model Number | R60AD8-G |
| Series | MELSEC iQ-R Series |
| Module Type | Channel-Isolated Analog Input Module |
| Number of Channels | 8 channels |
| Input Voltage Ranges | -10 to 10 V, 0 to 10 V, 0 to 5 V, 1 to 5 V (DC) |
| Input Current Ranges | 0 to 20 mA, 4 to 20 mA (DC) |
| Occupied I/O Points | 32 points |
| Internal Current Consumption | 0.33 A (at 5 VDC) |
| Connection Type | 40-pin Connector |
| Dimensions (W x H x D) | 27.8 mm x 106 mm x 110 mm |
| Net Weight | 0.19 kg |
| Shipping Weight (Calculated) | 0.35 kg |
| Standards and Approvals | CE, UL, cUL, EAC, ABS, BV, DNV GL, LR, NK, RINA |
When migrating legacy systems from the Q-Series (such as the Q68AD-G), please note that the programming parameters must be entirely reconfigured inside GX Works3. There is no direct parameters import tool for channel-isolated modules due to hardware backplane architecture differences in the iQ-R platform.
Keep in mind that while the channels are isolated up to the rated limits, exposing the module to continuous inter-channel voltage differences exceeding 250 VAC/VDC can cause long-term thermal breakdown of the optoelectronic isolation boundaries. Ensure all field-side shielding is connected to a single ground potential to avoid high common-mode voltage buildup.
For unused channels on this module, configure them as "Unused" or "Disable" inside the module parameter settings block in GX Works3. Leaving an unused channel enabled without an active signal loop may trigger diagnostic error flags or cause processing cycle times to run slower as the A/D converter continues searching for a valid reference loop.
Always ensure the main rack power supply and all field loop power sources are fully disconnected and locked out before inserting or removing the module. Plugging or unplugging the 40-pin connector under active power can cause internal ASIC degradation or spark hazards in explosive environments.
Power down the iQ-R base rack and lock out all auxiliary 24 VDC process loop supplies powering the transmitters.
Mount the R60AD8-G module onto the backplane base unit slot, ensuring the module latching projection at the bottom is fully seated before locking the top fixing screw.
Securely wire the 40-pin external connector. Terminate the cable shields to the system's functional ground bar to maintain robust shielding performance.
Global Express Shipping
Returns & Warranty
Manufacturer: Mitsubishi Electric
Product No.: R60AD8-G
Country of origin:United States
Product Type: PLC Analog Input Modules
Payment: T/T, Western Union
Weight: 2000g
Dimensions: 27.8 mm x 106 mm x 110 mm
Shipping port: Xiamen
Warranty: 12 months
Providing channel-to-channel electrical isolation for enhanced noise immunity, the Mitsubishi Electric R60AD8-G is an 8-channel analog input module engineered for integration within the high-performance MELSEC iQ-R control architecture. This module enables the direct and precise acquisition of both voltage and current analog signals, safeguarding system integrity by preventing ground loops and signal cross-talk in electrically hostile industrial environments. With individual channel configuration and embedded signal processing functions, it delivers accurate process telemetry directly to the controller backplane.
| Manufacturer | Mitsubishi Electric |
| Model Number | R60AD8-G |
| Series | MELSEC iQ-R Series |
| Module Type | Channel-Isolated Analog Input Module |
| Number of Channels | 8 channels |
| Input Voltage Ranges | -10 to 10 V, 0 to 10 V, 0 to 5 V, 1 to 5 V (DC) |
| Input Current Ranges | 0 to 20 mA, 4 to 20 mA (DC) |
| Occupied I/O Points | 32 points |
| Internal Current Consumption | 0.33 A (at 5 VDC) |
| Connection Type | 40-pin Connector |
| Dimensions (W x H x D) | 27.8 mm x 106 mm x 110 mm |
| Net Weight | 0.19 kg |
| Shipping Weight (Calculated) | 0.35 kg |
| Standards and Approvals | CE, UL, cUL, EAC, ABS, BV, DNV GL, LR, NK, RINA |
When migrating legacy systems from the Q-Series (such as the Q68AD-G), please note that the programming parameters must be entirely reconfigured inside GX Works3. There is no direct parameters import tool for channel-isolated modules due to hardware backplane architecture differences in the iQ-R platform.
Keep in mind that while the channels are isolated up to the rated limits, exposing the module to continuous inter-channel voltage differences exceeding 250 VAC/VDC can cause long-term thermal breakdown of the optoelectronic isolation boundaries. Ensure all field-side shielding is connected to a single ground potential to avoid high common-mode voltage buildup.
For unused channels on this module, configure them as "Unused" or "Disable" inside the module parameter settings block in GX Works3. Leaving an unused channel enabled without an active signal loop may trigger diagnostic error flags or cause processing cycle times to run slower as the A/D converter continues searching for a valid reference loop.
Always ensure the main rack power supply and all field loop power sources are fully disconnected and locked out before inserting or removing the module. Plugging or unplugging the 40-pin connector under active power can cause internal ASIC degradation or spark hazards in explosive environments.
Power down the iQ-R base rack and lock out all auxiliary 24 VDC process loop supplies powering the transmitters.
Mount the R60AD8-G module onto the backplane base unit slot, ensuring the module latching projection at the bottom is fully seated before locking the top fixing screw.
Securely wire the 40-pin external connector. Terminate the cable shields to the system's functional ground bar to maintain robust shielding performance.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
