Manufacturer: Omron
Product No.: CS1H-CPU63H
Country of origin:Japan
Product Type: PLC CPU Modules
Payment: T/T, Western Union
Weight: 500g
Dimensions: 160 mm x 140 mm x 80 mm
Shipping port: Xiamen
Warranty: 12 months
Executing complex industrial automation sequences, the Omron CS1H-CPU63H serves as a high-performance central processing unit within the modular CS1 series programmable logic controller architecture. This unit manages high-speed processing, large-scale data registration, and extensive I/O distribution across multiple expansion racks. Built to interface seamlessly with advanced motion control, serial communications, and network modules, the processor features dedicated peripheral and RS-232C interfaces for local maintenance, programming, and host link communications.
| Specification Parameter | Value / Details |
|---|---|
| Manufacturer | Omron |
| Model Series | CS1 Series (CS1H) |
| Program Capacity | 20 Ksteps |
| Data Memory Capacity | 64 Kwords (DM: 32 Kwords, EM: 32 Kwords x 1 bank) |
| I/O Points / Bits | 5,120 bits (Up to 7 Expansion Racks) |
| LD Instruction Processing Speed | 0.02 microseconds |
| Built-in Communication Interfaces | Peripheral Port, RS-232C Port (D-sub 9-pin female) |
| Current Consumption | 1.10 A at 5 VDC |
| Operating Temperature Range | 0 to 55 degC |
| Country of Origin | Japan |
| Shipping Weight (Calculated) | 0.55 kg (excluding packaging) / 2.50 kg (gross shipping weight) |
| Package Dimensions (Calculated) | 160 mm x 140 mm x 80 mm |
The integrated RS-232C interface utilizes a standard D-sub 9-pin female connector configured for serial communication, Modbus RTU, or host link connectivity. Pin assignments are structured as follows:
| Connector Pin / Terminal | Signal Abbreviation | Function / Circuit Assignment |
|---|---|---|
| Pin 1 | FG | Frame Ground (Shield Connection) |
| Pin 2 | SD (TXD) | Send Data / Transmit |
| Pin 3 | RD (RXD) | Receive Data |
| Pin 4 | RS (RTS) | Request to Send |
| Pin 5 | CS (CTS) | Clear to Send |
| Pin 9 | SG (GND) | Signal Ground |
The CS1H-CPU63H is a direct successor to legacy CS1H-CPU63 modules. While backplane footprints remain identical, program migration to the 'H' suffix CPU requires CX-Programmer version 3.0 or higher to correctly access enhanced instruction sets and utilize the faster CPU bus speed characteristics.
With an internal current draw of 1.10 A on the 5 VDC rail, system engineers must run a strict power-balance budget for the chosen backplane. Combining high-density input modules, analog units, and communication modules on the same chassis may cause voltage drops if using standard power supply units like the PA204. Upgrade to a PA207R power supply if the total internal 5 VDC demand exceeds 80% of the power supply's output rating.
The front dip switch cover conceals configuration switches. Set Dip Switch 4 to the 'OFF' position to use custom communication parameters for the RS-232C port. Leaving Switch 4 'ON' forces the port to default to standard host link auto-detect configuration, which can overwrite custom serial protocol parameters defined in the PLC setup parameters.
CRITICAL WARNING
Do not insert or remove this central processing unit while the backplane power supply is turned on. Live-plugging will result in permanent damage to the CPU bus interface, internal flash memory corruption, or complete control system failure.
Isolate the primary incoming power source feeding the CS1 system power supply module and verify zero-voltage status.
Align the top and bottom guides of the CS1H-CPU63H module into the dedicated CPU slot (usually the leftmost slot next to the power supply unit).
Carefully push the unit straight into the backplane connector until the locking mechanisms click and lock securely into position.
Attach the standard ground wire to the backplane's grounding terminal and tighten the terminal to 1.2 N-m torque to prevent industrial EMI noise issues.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
Checks to record before replacing ABB 3HNE 00006-1 DSQC 351: controller generation, X3/X5/X20/X21 wiring, DeviceNet settings, INTERBUS mapping, and LED states.
Compare the IC693CPU360 and IC693CPU364 by Ethernet interface, +5 VDC load, memory, rack limits, and replacement checks.
A field-first diagnostic sequence for 1756-OF4 analog output problems: channel mode, removable terminal block, scaling, and controlled electrical checks.
A direct comparison of 1746-OA8 and 1746-OA16 output count, common grouping, backplane current and temperature-derated load limits.
A field checklist for recording the 1761-NET-DNI hardware series, firmware, EDS file, DF1 settings, DeviceNet address and messaging configuration before replacement.
The EL3062 is a 0–10 V EtherCAT terminal. The EL3062-0030 is a 0–30 V variant. This checklist covers identification, scaling and commissioning.
