Integrating directly into modern industrial control topologies, the Omron NB10W-TW01B programmable terminal delivers robust human-machine interface performance via a wide 10.1-inch TFT touchscreen. Operating on a nominal 24V DC input, this unit bridges the gap between operators and PLCs using a brilliant 65,536-color display backed by long-life LED illumination. The terminal features 128 MB of internal memory, facilitating complex screen hierarchies, high-resolution graphic elements, and extensive recipe storage without performance degradation.
Equipped with comprehensive physical interfaces, this HMI facilitates concurrent communications across Ethernet, RS-232C, and RS-422/485 serial buses. Built-in USB Host and Client ports support efficient project updates, diagnostic logging, and peripheral connection. Built for harsh factory floors, the front panel achieves IP65 protection, preventing dust ingress and water jet disruptions during washdown cycles.
| Parameter | Specification |
|---|---|
| Manufacturer | Omron Corporation |
| Model Number | NB10W-TW01B |
| Display Size / Type | 10.1-inch TFT LCD (Widescreen) |
| Resolution | 800 x 480 Pixels (WVGA) |
| Display Colors | 65,536 Colors |
| Backlight Type / Lifetime | LED / 50,000 Operating Hours (at 25 degC) |
| Input Supply Voltage | 24V DC (Allowable Range: 20.4 to 27.6 VDC) |
| Power Consumption | 14W Maximum |
| Internal Memory Capacity | 128 MB (Screen data storage) |
| Ethernet Communications | 1x RJ-45 (10/100 Base-T) |
| Serial Communications | COM1 (RS-232C), COM2 (RS-422/RS-485) |
| USB Ports | 1x USB Host (USB 2.0), 1x USB Client (USB 2.0) |
| Front Panel Protection | IP65 (Dust-proof, Water jet resistant) |
| Ambient Operating Temperature | 0 to 50 degC |
| Physical Dimensions (W x H x D) | 268.8 mm x 210.8 mm x 54.0 mm |
| Panel Cutout Dimensions | 258.0 mm x 200.0 mm |
| Shipping Weight (Calculated) | 2.15 kg (packaged unit) |
| Package Dimensions (Calculated) | 310 mm x 260 mm x 110 mm |
| Country of Origin | China |
| Port / Connector | Pin / Interface Type | Function / Signal Assignment |
|---|---|---|
| COM1 Port | 9-pin D-Sub Male (RS-232C) | Pin 2: SD (TXD), Pin 3: RD (RXD), Pin 9: SG (Signal Ground) |
| COM2 Port | 9-pin D-Sub Female (RS-422/485) | Pins 1 & 6: SDB+ / RDB+, Pins 2 & 7: SDA- / RDA-, Pin 9: SG |
| Ethernet Port | RJ-45 (10/100Base-T) | Network configuration, Modbus/TCP, and high-speed project download |
| USB Slave | USB Type B | Direct configuration connection to PC running NB-Designer |
| USB Host | USB Type A | Firmware extraction, runtime application updates, CSV data log collection |
| Power Input Terminal | 3-pin Screw Terminal | Pin 1: 24V DC (+), Pin 2: 0V (-), Pin 3: Functional Ground (FG) |
The NB10W-TW01B represents the flagship wide-format display within Omron's NB Series, offering significantly expanded interface options compared to smaller variants (such as the NB3W or NB5W). If migrating from older NS-Series or NQ-Series panels, please note that project conversion requires manual element-mapping inside NB-Designer, as graphics databases are not directly backward-compatible. System developers should use NB-Designer Version 1.3 or later to ensure appropriate driver allocation for modern Omron Sysmac NJ/NX controller communications.
A common industrial pitfall involves communication interruptions when integrating the serial ports (COM1/COM2) with non-Omron controllers. The internal grounding of the RS-422/485 port is shared with the logic system ground; consequently, if substantial potential differences exist between the HMI and the controller chassis, serial driver failure can occur. High-frequency electrical noise from nearby variable frequency drives (VFDs) can also interfere with touch inputs or communication stability. Standard panel isolation mounting is highly recommended under these conditions.
When downloading configuration data over USB, verify that the USB driver has been correctly installed in Windows Device Manager, as the NB Series utilizes a proprietary virtual COM port assignment. For remote updates via Ethernet, ensure that the static IP address, subnet mask, and gateway address allocated within the project database correspond exactly to the on-site physical network architecture. Use a shielded, twisted-pair category 5e or 6 Ethernet cable for all industrial field runs.
Prepare a precise rectangular cutout in the enclosure door measuring 258.0 mm (W) x 200.0 mm (H). Remove any sharp burrs or structural distortions along the cutout edges to ensure a continuous sealing seat.
Verify that the continuous rubber gasket is correctly seated in the groove on the rear perimeter of the HMI bezel. This gasket is vital for securing the IP65 fluid protection rating.
Insert the HMI through the front cutout of the panel door. Fit the provided mounting brackets into the dedicated slots around the sides of the terminal housing.
Tighten the mounting bracket screws evenly to a recommended torque of 0.5 to 0.6 N-m. Avoid over-tightening to prevent plastic casing deformation or structural damage to the screen assembly.
Connect a dedicated 24V DC power source to the 3-pin input terminal block. Attach a minimum 2.0 mm² copper conductor from the functional ground (FG) terminal to the central system ground terminal.
Global Express Shipping
Returns & Warranty
Manufacturer: Omron
Product No.: NB10W-TW01B
Country of origin:Japan
Product Type: HMI Panels
Payment: T/T, Western Union
Weight: 8000g
Dimensions: 310 mm x 260 mm x 110 mm
Shipping port: Xiamen
Warranty: 12 months
Integrating directly into modern industrial control topologies, the Omron NB10W-TW01B programmable terminal delivers robust human-machine interface performance via a wide 10.1-inch TFT touchscreen. Operating on a nominal 24V DC input, this unit bridges the gap between operators and PLCs using a brilliant 65,536-color display backed by long-life LED illumination. The terminal features 128 MB of internal memory, facilitating complex screen hierarchies, high-resolution graphic elements, and extensive recipe storage without performance degradation.
Equipped with comprehensive physical interfaces, this HMI facilitates concurrent communications across Ethernet, RS-232C, and RS-422/485 serial buses. Built-in USB Host and Client ports support efficient project updates, diagnostic logging, and peripheral connection. Built for harsh factory floors, the front panel achieves IP65 protection, preventing dust ingress and water jet disruptions during washdown cycles.
| Parameter | Specification |
|---|---|
| Manufacturer | Omron Corporation |
| Model Number | NB10W-TW01B |
| Display Size / Type | 10.1-inch TFT LCD (Widescreen) |
| Resolution | 800 x 480 Pixels (WVGA) |
| Display Colors | 65,536 Colors |
| Backlight Type / Lifetime | LED / 50,000 Operating Hours (at 25 degC) |
| Input Supply Voltage | 24V DC (Allowable Range: 20.4 to 27.6 VDC) |
| Power Consumption | 14W Maximum |
| Internal Memory Capacity | 128 MB (Screen data storage) |
| Ethernet Communications | 1x RJ-45 (10/100 Base-T) |
| Serial Communications | COM1 (RS-232C), COM2 (RS-422/RS-485) |
| USB Ports | 1x USB Host (USB 2.0), 1x USB Client (USB 2.0) |
| Front Panel Protection | IP65 (Dust-proof, Water jet resistant) |
| Ambient Operating Temperature | 0 to 50 degC |
| Physical Dimensions (W x H x D) | 268.8 mm x 210.8 mm x 54.0 mm |
| Panel Cutout Dimensions | 258.0 mm x 200.0 mm |
| Shipping Weight (Calculated) | 2.15 kg (packaged unit) |
| Package Dimensions (Calculated) | 310 mm x 260 mm x 110 mm |
| Country of Origin | China |
| Port / Connector | Pin / Interface Type | Function / Signal Assignment |
|---|---|---|
| COM1 Port | 9-pin D-Sub Male (RS-232C) | Pin 2: SD (TXD), Pin 3: RD (RXD), Pin 9: SG (Signal Ground) |
| COM2 Port | 9-pin D-Sub Female (RS-422/485) | Pins 1 & 6: SDB+ / RDB+, Pins 2 & 7: SDA- / RDA-, Pin 9: SG |
| Ethernet Port | RJ-45 (10/100Base-T) | Network configuration, Modbus/TCP, and high-speed project download |
| USB Slave | USB Type B | Direct configuration connection to PC running NB-Designer |
| USB Host | USB Type A | Firmware extraction, runtime application updates, CSV data log collection |
| Power Input Terminal | 3-pin Screw Terminal | Pin 1: 24V DC (+), Pin 2: 0V (-), Pin 3: Functional Ground (FG) |
The NB10W-TW01B represents the flagship wide-format display within Omron's NB Series, offering significantly expanded interface options compared to smaller variants (such as the NB3W or NB5W). If migrating from older NS-Series or NQ-Series panels, please note that project conversion requires manual element-mapping inside NB-Designer, as graphics databases are not directly backward-compatible. System developers should use NB-Designer Version 1.3 or later to ensure appropriate driver allocation for modern Omron Sysmac NJ/NX controller communications.
A common industrial pitfall involves communication interruptions when integrating the serial ports (COM1/COM2) with non-Omron controllers. The internal grounding of the RS-422/485 port is shared with the logic system ground; consequently, if substantial potential differences exist between the HMI and the controller chassis, serial driver failure can occur. High-frequency electrical noise from nearby variable frequency drives (VFDs) can also interfere with touch inputs or communication stability. Standard panel isolation mounting is highly recommended under these conditions.
When downloading configuration data over USB, verify that the USB driver has been correctly installed in Windows Device Manager, as the NB Series utilizes a proprietary virtual COM port assignment. For remote updates via Ethernet, ensure that the static IP address, subnet mask, and gateway address allocated within the project database correspond exactly to the on-site physical network architecture. Use a shielded, twisted-pair category 5e or 6 Ethernet cable for all industrial field runs.
Prepare a precise rectangular cutout in the enclosure door measuring 258.0 mm (W) x 200.0 mm (H). Remove any sharp burrs or structural distortions along the cutout edges to ensure a continuous sealing seat.
Verify that the continuous rubber gasket is correctly seated in the groove on the rear perimeter of the HMI bezel. This gasket is vital for securing the IP65 fluid protection rating.
Insert the HMI through the front cutout of the panel door. Fit the provided mounting brackets into the dedicated slots around the sides of the terminal housing.
Tighten the mounting bracket screws evenly to a recommended torque of 0.5 to 0.6 N-m. Avoid over-tightening to prevent plastic casing deformation or structural damage to the screen assembly.
Connect a dedicated 24V DC power source to the 3-pin input terminal block. Attach a minimum 2.0 mm² copper conductor from the functional ground (FG) terminal to the central system ground terminal.
| Product Image | Model Number / Title | Condition | Availability | Action |
|---|---|---|---|---|
|
Allen-Bradley 2711P-T15C4D9 PanelView Plus 6 Terminal | Original New | In Stock | View Details |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
