Manufacturer: Omron
Product No.: NJ301-1100
Country of origin:Japan
Product Type: PLC CPU Modules
Payment: T/T, Western Union
Weight: 2000g
Dimensions: 90 mm x 90 mm x 90 mm
Shipping port: Xiamen
Warranty: 12 months
Integrating high-speed motion and sequence control into a unified database engine, the Omron NJ301-1100 serves as a high-performance central processing unit within the Sysmac NJ automation platform. This controller is designed to manage up to 4 synchronized axes and up to 15 total axes (including virtual), making it highly suitable for compact to mid-sized machine automation projects. Operating with a rapid 0.5 ms primary task cycle time and featuring 2.5 MB of variables memory, the unit ensures responsive, deterministic execution of complex logic and motion profiles. Standard built-in communication interfaces include EtherCAT Master, EtherNet/IP, and USB, facilitating seamless vertical integration and robust field-level device communication.
| Parameter | Specification |
|---|---|
| Manufacturer | Omron |
| Model / SKU | NJ301-1100 |
| Controller Series | Sysmac NJ3 |
| Functional Capabilities | Motion Control, Sequence Control |
| Synchronous Axes (Max) | 4 |
| Total Axes (Max, incl. Virtual) | 15 |
| Primary Task Cycle Time | 0.5 ms |
| Variables Memory Capacity | 2.5 MB |
| Onboard Communication Ports | EtherCAT Master, EtherNet/IP, USB (Type-B) |
| Local Expansion Bus System | CJ I/O Bus (Supports up to 40 expansion units) |
| Remote I/O Node Capacity | Up to 192 nodes |
| Unit Dimensions (L x W x H) | 90 mm x 90 mm x 90 mm |
| Unit Weight | 530 g (0.53 kg) |
| Shipping Weight (Calculated) | 2.00 kg |
| Port / Interface | Physical Connector | Function / Assignment |
|---|---|---|
| EtherCAT Port | RJ45 (Shielded) | Real-time network master for servo drives, variable speed drives, and remote I/O terminal modules. |
| EtherNet/IP Port | RJ45 (Shielded) | Host communications, programming, HMIs, peer-to-peer PLC data exchange, and tag data link connections. |
| USB Port | USB 2.0 Type-B | Direct local connection point for Sysmac Studio engineering software. |
The NJ301-1100 CPU integrates legacy CJ-series physical form factors while running the modern Sysmac NJ firmware architecture. Note that while CJ-series I/O modules are physically compatible and mount directly on the local bus, they must be registered in the Sysmac Studio configuration tool rather than legacy CX-Programmer. Programs developed for CJ1/CJ2 PLCs cannot be directly downloaded and must undergo conversion within Sysmac Studio before execution.
When utilizing the CJ I/O Bus expansion units alongside high-density communication modules or high-current analog units, calculate the total current consumption across the internal 5 VDC and 24 VDC rails carefully. Ensure your chosen Power Supply Unit (PSU) can supply the calculated current. Also, maintain a minimum of 20 mm clearance above and below the rack assembly to permit adequate convective cooling; failures to provide sufficient thermal headroom can lead to localized heat buildup and memory corruption or watchdog errors.
Always use Category 5e (or better) Double-Shielded Twisted Pair (STP) cables for both EtherCAT and EtherNet/IP connections. To prevent ground-loop noise on the communication lines, ground the functional ground (FG) terminal of the power supply unit and CPU rack using a heavy-gauge conductor tied to a dedicated low-resistance grounding block (less than 100 ohms). Verify that the EtherCAT cable shields make complete, continuous contact with the RJ45 metallic shell connectors.
Disconnect all electrical supply sources before physically mounting, wiring, or swapping any components. Never insert or extract CJ-series I/O modules from the system bus while the CPU is powered on. Failure to comply can damage the internal bus drivers of both the CPU and adjacent expansion modules.
Mount the CPU unit and adjacent power supply module firmly to standard 35 mm DIN rail or directly to the backplane panel using the integrated mounting brackets.
Slide the side connectors together until the locks click into place, securing the CPU module to the power supply unit on its left and any CJ-series modules on its right.
Terminate the industrial communication network cables in their dedicated RJ45 ports (EtherCAT and EtherNet/IP), ensuring appropriate strain relief and shielding configurations.
Connect the main functional ground to the dedicated rack ground lug, then apply primary supply voltage and verify successful boot sequences via the LED diagnostics on the front faceplate.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
A practical commissioning sequence for KEPServerEX OPC UA connections: define data ownership, test tags locally, configure endpoint and certificate trust, limit access, then verify failure recovery...
Commissioning an Ethernet-connected PLC often starts with the laptop, not the controller. Learn how to record existing settings, choose a temporary address, test connectivity, and restore the plant...
Combustible dust controls require more than alarms. Learn how to map dust generation, select instrumentation, design interlocks, handle failed feedback, test safe states, and maintain the full...
Hairpin windings raise slot fill and support compact traction motors, but conductor geometry, AC losses, insulation damage, weld quality, and cooling determine whether the design meets its targets.
Use Ansible to standardize SCADA server changes without expanding OT risk. This guide covers inventories, idempotent playbooks, staged testing, credentials, logging, and practical rollback controls.
A VPN encrypts the path to an industrial network, but secure remote PLC work also needs identity controls, segmented access, change approval, logging, safe operating boundaries, and tested recovery...
