Integrating directly into the Sysmac control architecture, the Omron NX-DA2205 provides high-resolution current output control for precise industrial process automation. This modular analog output unit is engineered to drive modulating field devices such as control valves, actuators, and speed drives with maximum reliability. Equipped with an advanced screwless clamping terminal block, the module ensures robust connection integrity, eliminating the risk of terminal loosening in environments subject to continuous mechanical vibration.
| Manufacturer | Omron |
| Model | NX-DA2205 |
| Series | NX Series |
| Product Type | Analog Output Unit |
| Number of Outputs | 2 channels |
| Output Signal Range | 4 to 20 mA |
| Conversion Range | -5% to 105% (full scale) |
| Resolution | 1/30,000 (full scale) |
| Allowable Load Resistance | 600 Ohms minimum |
| Refreshing Method | Selectable Synchronous I/O or Free-Run refreshing |
| Terminal Block Configuration | Screwless Clamping Terminal Block (8 terminals) |
| Dimensions (L x W x H) | 71 mm x 12 mm x 100 mm |
| Net Weight | 0.7 kg |
| Shipping Weight (Calculated) | 2.0 kg |
The NX-DA2205 is fully compatible with Sysmac studio and works with all standard Omron NX-series EtherCAT and EtherNet/IP bus couplers, as well as NX-series CPU modules. If your application requires a voltage-based output signal instead of current loop control, consider the NX-DA2105 (voltage output) model. For higher density layouts, refer to the 4-channel analog output equivalents within the same NX platform.
Be mindful of the loop impedance when integrating with third-party analog receivers. The output stage of the NX-DA2205 requires a minimum allowable load resistance of 600 Ohms for stable operation. Ensure that your overall loop resistance—including field cabling resistance and the receiver's internal impedance—complies with this specification to prevent signal attenuation or error codes.
Always use shielded twisted-pair (STP) cabling for analog current signals to reduce the impact of high-frequency noise from nearby motor drives or power cables. Ground the cable shield only at the controller side (functional ground terminal on the NX bus coupler) to avoid creating ground loops. In Sysmac Studio, ensure you configure safe output values (e.g., hold last state or drop to 4 mA) to maintain safe system states during CPU stop conditions or communications failures.
De-energize all system power sources, including local control bus power and external field power loops, before mounting, removing, or wiring the module. Working on energized components can damage delicate internal hardware and lead to unpredictable physical control transitions.
Mount the module onto the DIN rail, checking that the alignment hooks mate correctly with the adjacent Sysmac NX module.
Prepare wires using standard ferrules to ensure clean insertion and maximize vibration immunity within the screwless clamp terminal block.
Insert the conductors straight into the terminal ports. Perform a gentle pull test on each conductor to confirm clamp engagement.
Global Express Shipping
Returns & Warranty
Manufacturer: Omron
Product No.: NX-DA2205
Country of origin:Japan
Product Type: Analog Output Modules
Payment: T/T, Western Union
Weight: 2000g
Dimensions: 71 mm x 12 mm x 100 mm
Shipping port: Xiamen
Warranty: 12 months
Integrating directly into the Sysmac control architecture, the Omron NX-DA2205 provides high-resolution current output control for precise industrial process automation. This modular analog output unit is engineered to drive modulating field devices such as control valves, actuators, and speed drives with maximum reliability. Equipped with an advanced screwless clamping terminal block, the module ensures robust connection integrity, eliminating the risk of terminal loosening in environments subject to continuous mechanical vibration.
| Manufacturer | Omron |
| Model | NX-DA2205 |
| Series | NX Series |
| Product Type | Analog Output Unit |
| Number of Outputs | 2 channels |
| Output Signal Range | 4 to 20 mA |
| Conversion Range | -5% to 105% (full scale) |
| Resolution | 1/30,000 (full scale) |
| Allowable Load Resistance | 600 Ohms minimum |
| Refreshing Method | Selectable Synchronous I/O or Free-Run refreshing |
| Terminal Block Configuration | Screwless Clamping Terminal Block (8 terminals) |
| Dimensions (L x W x H) | 71 mm x 12 mm x 100 mm |
| Net Weight | 0.7 kg |
| Shipping Weight (Calculated) | 2.0 kg |
The NX-DA2205 is fully compatible with Sysmac studio and works with all standard Omron NX-series EtherCAT and EtherNet/IP bus couplers, as well as NX-series CPU modules. If your application requires a voltage-based output signal instead of current loop control, consider the NX-DA2105 (voltage output) model. For higher density layouts, refer to the 4-channel analog output equivalents within the same NX platform.
Be mindful of the loop impedance when integrating with third-party analog receivers. The output stage of the NX-DA2205 requires a minimum allowable load resistance of 600 Ohms for stable operation. Ensure that your overall loop resistance—including field cabling resistance and the receiver's internal impedance—complies with this specification to prevent signal attenuation or error codes.
Always use shielded twisted-pair (STP) cabling for analog current signals to reduce the impact of high-frequency noise from nearby motor drives or power cables. Ground the cable shield only at the controller side (functional ground terminal on the NX bus coupler) to avoid creating ground loops. In Sysmac Studio, ensure you configure safe output values (e.g., hold last state or drop to 4 mA) to maintain safe system states during CPU stop conditions or communications failures.
De-energize all system power sources, including local control bus power and external field power loops, before mounting, removing, or wiring the module. Working on energized components can damage delicate internal hardware and lead to unpredictable physical control transitions.
Mount the module onto the DIN rail, checking that the alignment hooks mate correctly with the adjacent Sysmac NX module.
Prepare wires using standard ferrules to ensure clean insertion and maximize vibration immunity within the screwless clamp terminal block.
Insert the conductors straight into the terminal ports. Perform a gentle pull test on each conductor to confirm clamp engagement.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
