Description
This is a Siemens SIMATIC IPC 477D Panel PC, model 6AV7240-3CC10-4AA0, designed for machine-level visualization and control tasks in industrial environments. This specific configuration features a 15-inch touch and key display, an Intel Core i3-3217UE processor, 4 GB of RAM, and an 80 GB MLC Solid-State Drive for reliable data storage. It is equipped with a versatile set of interfaces, including dual Gigabit Ethernet ports, multiple USB connections, an RS-232 serial port, and a PCIe expansion slot. The unit is powered by an integrated 110/230V AC industrial power supply and is delivered without a pre-installed operating system, providing flexibility for custom software deployment.
Features
- 15-inch display with combined touch and key input methods
- Powered by an Intel Core i3-3217UE processor
- Equipped with 4 GB of system memory
- Includes an 80 GB MLC Solid-State Drive (SSD)
- Integrated 110/230V AC industrial power supply with NAMUR compliance
- Dual Gigabit Ethernet ports for network connectivity (IE/PN)
- Five USB ports (4 rear, 1 front) for peripheral devices
- One RS-232 serial port and one PCIe expansion slot
- Supplied without an operating system or SIMATIC software
Applications
- Human-Machine Interface (HMI) for machinery control
- Process visualization and data logging
- Supervisory Control and Data Acquisition (SCADA) nodes
- Industrial data gateways and communication hubs
- Manufacturing Execution Systems (MES) terminals
Technical Specifications
| Specification |
Value |
| Product Type |
SIMATIC IPC 477D Panel PC |
| Display |
15-inch Touch/Key Display |
| Processor |
Intel Core i3-3217UE |
| Memory |
4 GB |
| Storage |
80 GB Solid-State Drive (SSD), MLC |
| Ethernet Ports |
2x Gigabit Ethernet (10/100/1000 Mbps), IE/PN compatible |
| USB Ports |
4x Rear, 1x Front |
| Serial Port |
1x RS-232 |
| Expansion Slot |
1x PCIe |
| Power Supply |
110/230V AC Industrial Power Supply Unit with NAMUR |
| Operating System |
None |
| Included Software |
None |
| Included Accessories |
Power supply cable for Europe |
| Product Lifecycle Status |
Phase-Out |
| Shipping Weight |
5.80 kg |
| Manufacturer |
Siemens |
| Country of Origin |
Germany (Estimate) |
| Package Dimensions (Calculated) |
48 cm x 38 cm x 15 cm |
Installation Guidelines
CRITICAL WARNING: RISK OF ELECTRIC SHOCK
Installation must be performed by qualified personnel only. Disconnect all power sources and follow Lockout/Tagout (LOTO) procedures before accessing or installing this equipment. Failure to de-energize the system can result in severe injury or death.
-
1
Verify the panel cutout dimensions are correct for the IPC 477D chassis. Ensure the mounting surface is clean, flat, and free of debris to achieve a proper seal.
-
2
Insert the Panel PC into the prepared cutout from the front. Secure the unit from the rear using all provided mounting clamps, tightening them in a cross-pattern to distribute pressure evenly.
-
3
Connect the protective earth (PE) conductor to the designated terminal on the chassis. A low-impedance ground connection is critical for safety and noise immunity.
-
4
Connect the 110/230V AC power supply cable to the unit's power input connector. Ensure the power source is stable and within the specified voltage and frequency range.
-
5
Connect all required data cables (Ethernet, USB, RS-232). Use shielded cables where specified and route them separately from high-power AC lines to prevent electromagnetic interference.