Description
The Siemens 6AV7613-0AE32-0BF0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This unit features a 12-inch TFT display, is powered by a Pentium III 500 MHz CPU, and comes equipped with 256 MB of RAM and a 40 GB hard drive. Configured for a 115-230V AC power supply and pre-installed with the Windows 98 operating system, this panel PC serves as a direct replacement or spare for legacy automation systems. Please note that this model is an obsolete product, ideal for maintaining existing installations.
Features
- 12-inch TFT color display for process visualization
- Integrated Pentium III 500 MHz processor
- 256 MB of installed RAM
- 40 GB hard disk drive for application and data storage
- Wide-range power supply input of 115-230V AC
- Pre-loaded with Windows 98 (English) operating system
- Robust construction for industrial environments
Applications
- Machine control and process visualization
- Data acquisition and logging systems
- Manufacturing execution systems (MES)
- Factory floor operator stations
- Replacement for legacy HMI systems in production lines
Technical Specifications
| Specification |
Value |
| Product Type |
Panel PC |
| Series |
SIMATIC Panel PC 670 |
| Display |
12-inch TFT |
| Processor (CPU) |
Pentium III, 500 MHz |
| Memory (RAM) |
256 MB |
| Storage |
40 GB Hard Drive (HD) |
| Operating System |
Windows 98 (English) |
| Power Supply |
115-230 V AC (Supplied with U.S. mains cable) |
| Product Lifecycle Status |
Obsolete |
| Harmonized Tariff Code |
85371091 |
| Export Control (ECCN) |
N |
| Shipping Weight |
4.00 kg |
| Country of Origin |
Germany (Estimate) |
| Manufacturer |
Siemens |
| Package Dimensions (Calculated) |
45 cm x 35 cm x 20 cm |
Installation Guidelines
CRITICAL WARNING: Electrical Hazard. Installation must be performed by qualified personnel only. Disconnect and lock out all power sources before installation or maintenance. Failure to comply can result in severe injury or death.
-
1
De-energize System: Before beginning installation, ensure the control cabinet and all related machinery are completely de-energized, locked out, and tagged out (LOTO) according to site safety procedures.
-
2
Panel Cutout and Mounting: Verify the panel cutout dimensions match the PC 670's requirements. Mount the unit securely using all specified mounting clamps, ensuring an even seal against the enclosure to maintain IP rating. Do not overtighten.
-
3
Protective Earth (PE) Connection: Connect the chassis to the main protective earth conductor of the control cabinet using a short, low-impedance cable. This is critical for operator safety and noise immunity.
-
4
Power and I/O Wiring: Connect the 115-230V AC power supply cable. Route all communication and I/O cables away from high-voltage lines to prevent electromagnetic interference. Ensure all connectors are fully seated and secured.
-
5
System Power-Up: After verifying all connections, remove LOTO devices and re-energize the cabinet. Observe the Panel PC during its boot sequence to confirm proper operation and software initialization.