Siemens 6AV7614-0AA20-0BE0 SIMATIC Panel PC 670 Panel PC

Description

The Siemens 6AV7614-0AA20-0BE0 is a SIMATIC Panel PC 670, an integrated human-machine interface (HMI) designed for industrial control and visualization applications. This unit features a 15-inch TFT touch display, an Intel Celeron 300 MHz processor, 128 MB of RAM, and a 20 GB hard drive. It is configured for a 115-230V AC power supply and includes a U.S. mains cable. This specific model comes pre-installed with a German language version of Windows 98 and is classified as an obsolete product, making it suitable for maintaining or replacing components in legacy automation systems.

Features

• ■15-inch TFT color touch screen for operator control
• ■Integrated Intel Celeron 300 MHz CPU
• ■128 MB of installed RAM
• ■20 GB hard disk drive for application and data storage
• ■Supports 115-230V AC power input
• ■Pre-installed with Windows 98 (German language version)

Applications

• ■Machine-level control and monitoring
• ■Process visualization and data acquisition
• ■Factory automation systems
• ■Replacement for failed units in existing legacy installations

Technical Specifications

Installation Guidelines

1. 1
   De-energize Equipment: Before installation, completely de-energize the control cabinet or mounting location. Apply Lockout/Tagout (LOTO) procedures to prevent accidental power-up.
2. 2
   Verify Panel Cutout: Confirm that the panel cutout dimensions match the requirements for the PC 670 chassis. Ensure adequate clearance for ventilation and cable routing.
3. 3
   Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal against the panel surface. Do not over-torque.
4. 4
   Establish Ground Connection: Connect a protective earth (PE) or grounding wire to the designated grounding terminal on the Panel PC chassis. This is the first electrical connection to be made.
5. 5
   Connect Power and I/O: Connect the 115-230V AC mains cable to the power input terminal. Connect all required communication cables (e.g., Ethernet, serial) and any other peripheral devices.
6. 6
   Final System Check: After removing LOTO and re-energizing the cabinet, power on the Panel PC. Verify that the operating system boots correctly and that all communication links with other system components are established.