Siemens 6AV7614-0AF20-0AH0 SIMATIC Panel PC 670

Description

This is a Siemens 6AV7614-0AF20-0AH0 SIMATIC Panel PC 670, an industrial-grade human-machine interface (HMI) designed for machine-level control and visualization tasks. This standard configuration features a 15-inch TFT touch display, an Intel Celeron 300 MHz CPU, and 128 MB of RAM. For data storage and software installation, it is equipped with a 40 GB hard drive and an integrated CD-ROM drive. The unit operates on a 24 V DC power supply and comes pre-installed with the Windows NT 4.0 operating system in German. Please note that this product is considered obsolete by the manufacturer, making it suitable for legacy system maintenance and spare parts inventory.

Features

• 15-inch TFT color display with touch functionality
• Intel Celeron processor operating at 300 MHz
• 128 MB of installed system RAM
• 40 GB internal hard drive for storage
• Integrated CD-ROM optical drive
• Powered by a nominal 24 V DC supply
• Pre-loaded with Windows NT 4.0 (German)

Applications

• Machine control and process visualization
• Supervisory Control and Data Acquisition (SCADA) nodes
• Factory floor operator stations
• Data logging and reporting terminals
• Maintenance and replacement for existing PC670 installations

Technical Specifications

Installation Guidelines

1. 1 Prepare the mounting location. Ensure the panel cutout dimensions are correct and the surface is clean, flat, and able to support the weight of the unit. Verify adequate clearance for ventilation and cable routing at the rear of the PC.
2. 2 Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal against the panel.
3. 3 Connect the 24 V DC power supply to the designated power input terminals. Verify correct polarity (+/-) before connecting. Use appropriately sized conductors for the load and distance from the power source.
4. 4 Establish a low-impedance protective earth (PE) connection to the dedicated grounding stud on the chassis. This is critical for personnel safety and electromagnetic compatibility (EMC).
5. 5 Connect all required communication and peripheral cables (e.g., Ethernet, serial, USB). Ensure all connectors are fully seated and secured. Power may now be restored to the system for commissioning.