Siemens 6AV7614-0AF22-0CJ0 SIMATIC Panel PC 670

Description

The Siemens 6AV7614-0AF22-0CJ0 is a SIMATIC Panel PC 670, an integrated operator panel designed for machine-level visualization and control tasks in industrial environments. This unit features a 15-inch TFT touch display for intuitive operator interaction. It is equipped with a Pentium III 500 MHz processor, 128 MB of RAM, and a 40 GB hard drive for application and data storage. The system includes an integrated CD-ROM drive and comes pre-installed with the Windows NT 4.0 English operating system. This configuration is powered by a 115-230 V AC supply and includes a European mains cable.

Features

• 15-inch TFT color display with integrated touch screen
• Powered by a Pentium III 500 MHz CPU
• 128 MB of system RAM
• 40 GB internal hard drive for storage
• Built-in CD-ROM drive for software installation and data access
• Pre-loaded with Microsoft Windows NT 4.0 (English)
• Wide input voltage range of 115-230 V AC

Applications

• Human-Machine Interface (HMI) for manufacturing lines
• Process visualization and control in plant automation
• Data acquisition and logging terminals
• SCADA client stations
• Machine control panels in OEM equipment

Technical Specifications

Installation Guidelines

1. 1 Prepare Mounting Location: Ensure the panel cutout dimensions are accurate and the mounting surface is clean, flat, and can support the weight of the unit (12.00 kg). Verify adequate clearance for ventilation and cable routing at the rear of the unit.
2. 2 Mount the Unit: Insert the Panel PC into the prepared cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal and prevent bezel distortion.
3. 3 Establish Ground Connection: Connect the chassis ground terminal to the control cabinet's protective earth (PE) busbar using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
4. 4 Connect Power: With the main power source locked out, connect the AC mains cable to the unit's power input terminal. Ensure the source voltage (115-230 V AC) matches the unit's rating. Route the power cable separately from signal and communication cables.
5. 5 Connect Peripherals: Connect all required communication (e.g., Ethernet, serial) and I/O cables. Ensure all connectors are fully seated and secured. Power on the unit only after all connections are made and the enclosure is safely closed.