Siemens 6AV7722-1AC00-0AF0 SIMATIC Panel PC 670

Description

The Siemens 6AV7722-1AC00-0AF0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This standard configuration unit integrates a 12.1-inch color TFT touch display with a Celeron processor running at 1.2 GHz. It is equipped with 128 MB of SDRAM and a 40 GB EIDE hard drive for data storage and application hosting. The system comes pre-installed with the Windows 98 SE operating system in English and includes a power supply box rated for 115-230V AC input. Please note that this product is considered obsolete by the manufacturer, making it suitable for legacy system maintenance and spare parts inventory.

Features

• Integrated 12.1-inch color TFT display with touch screen functionality.
• Powered by a Celeron 1.2 GHz processor.
• Includes 128 MB of SDRAM-133 memory.
• Features a 40 GB EIDE hard disk drive for storage.
• Pre-loaded with Windows 98 SE (English) operating system.
• Wide input voltage range of 115-230V AC.
• Designed for panel mounting in industrial enclosures.

Applications

• Machine-level operator control and monitoring.
• Process visualization and SCADA systems.
• Data acquisition and logging on the factory floor.
• Replacement unit for existing SIMATIC PC 670 installations.
• Manufacturing execution systems (MES) terminals.

Technical Specifications

Installation Guidelines

1. 1 Prepare the panel cutout according to the device's mechanical specifications. Ensure the mounting surface is clean, flat, and can support the weight of the unit.
2. 2 Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's recommended torque to ensure a proper seal.
3. 3 Connect a dedicated protective earth (PE) conductor to the designated grounding terminal on the chassis. This is essential for safety and noise immunity.
4. 4 Connect the 115-230V AC power supply cable to the unit's power input connector. Ensure the power source is stable and within the specified voltage and frequency range.
5. 5 Connect all necessary communication and I/O cables (e.g., Ethernet, serial, USB). Route cables to prevent strain and interference, separating signal cables from high-voltage power lines.