Description
The Siemens 6AV7722-2BA10-0AD0 is a SIMATIC Panel PC 670 configured as a standard industrial human-machine interface (HMI). This unit is equipped with a 12.1-inch color TFT touch display, powered by an Intel Pentium III 1.26 GHz processor. It includes 256 MB of SDRAM, a 40 GB EIDE hard drive, and an integrated DVD-ROM drive. The system operates on a 24V DC power supply and comes pre-installed with a multi-language version of the Windows 2000 operating system. Please note that this product is considered obsolete in the manufacturer's product lifecycle.
Features
- 12.1-inch Color TFT Touch Display
- Intel Pentium III 1.26 GHz Processor
- 256 MB SDRAM-133 Memory
- 40 GB EIDE Hard Disk Drive (HDD)
- Integrated DVD-ROM Optical Drive
- 24V DC Power Input for Industrial Environments
- Pre-installed Windows 2000 Operating System (Multi-language)
Applications
- Machine control interfaces (HMI)
- Process visualization and SCADA nodes
- Data logging and acquisition stations
- Factory floor information terminals
- Replacement for legacy systems requiring Windows 2000
Technical Specifications
| Specification |
Value |
| Part Number |
6AV7722-2BA10-0AD0 |
| Product Series |
SIMATIC Panel PC 670 |
| Product Type |
Industrial Panel PC |
| Display Size |
12.1 inch |
| Display Type |
Color TFT |
| Input Method |
Touchscreen |
| Processor |
Intel Pentium III, 1.26 GHz |
| Memory (RAM) |
256 MB SDRAM-133 (1x 256 MB) |
| Storage |
40 GB HDD EIDE |
| Optical Drive |
DVD-ROM |
| Operating System |
Windows 2000 (Multi-language) |
| Power Supply |
24V DC |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
12.00 kg |
| Package Dimensions (Calculated) |
35.0 x 25.0 x 25.0 cm |
| Commodity Code |
85371091 |
| ECCN |
N (Not subject to export control regulations) |
| Country of Origin |
Germany (Estimated) |
| Manufacturer |
Siemens |
Installation Guidelines
CRITICAL WARNING: Electrical hazard. Disconnect all power sources before installation or maintenance. Work must be performed by qualified personnel only. Failure to de-energize equipment can result in severe injury or death.
-
1
Panel Cutout and Mounting: Prepare the enclosure cutout according to the device's mechanical drawings. Ensure the mounting surface is clean, flat, and rigid. Insert the Panel PC into the cutout from the front and secure it evenly using all provided mounting clamps to maintain the specified IP rating. Do not overtighten the clamps.
-
2
Protective Earth (PE) Connection: Connect the chassis to the main protective earth conductor of the cabinet or system. Use a low-impedance connection with a short, large-gauge wire. This is critical for both safety and electromagnetic compatibility (EMC).
-
3
Power Supply Connection: Connect a stable, filtered 24V DC power source to the designated power input terminals. Verify correct polarity (+/-) before applying power. Use appropriately sized conductors and ensure connections are secure to prevent voltage drop and intermittent operation.
-
4
Ventilation and Environment: Ensure adequate ventilation around the rear of the unit to allow for heat dissipation. Do not block cooling fins or vents. Operate the unit within its specified ambient temperature and humidity ranges to ensure reliability and longevity.