Siemens 6AV7724-3BA20-0AF0 SIMATIC Panel PC 670

Description

This is a SIMATIC Panel PC 670, model 6AV7724-3BA20-0AF0, from Siemens, designed for human-machine interface (HMI) applications in industrial environments. This standard configuration unit features a 15.1-inch color TFT touchscreen display, powered by a Pentium III 1.26 GHz processor. It is equipped with 512 MB of SDRAM and an 80 GB EIDE hard drive. The system operates on a 24V DC power supply and comes pre-installed with the Windows 98 SE operating system in English. Please note, this model is classified as an obsolete product, making it suitable for maintaining or repairing legacy automation systems.

Features

• 15.1-inch Color TFT display with integrated touch functionality
• Pentium III processor operating at 1.26 GHz
• 512 MB SDRAM-133 configured as two 256 MB modules
• 80 GB EIDE internal hard disk drive for storage
• Integrated power supply unit for 24V DC input
• Pre-loaded with Windows 98 SE (English version)

Applications

• Legacy system maintenance and spare parts replacement
• Process visualization and control
• Machine-level data acquisition and logging
• Operator control stations in manufacturing and production lines

Technical Specifications

Installation Guidelines

1. 1
   Verify Panel Cutout: Before installation, confirm that the mounting cutout in the control cabinet or panel matches the required dimensions for the Panel PC 670. Ensure the mounting surface is clean, flat, and free of debris.
2. 2
   Mount the Unit: Carefully insert the Panel PC into the cutout from the front. Secure the unit from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a diagonal pattern to ensure a uniform seal against the panel gasket. Do not overtighten.
3. 3
   Connect Protective Earth (PE): Connect a low-impedance protective earth conductor to the designated PE terminal on the unit's chassis. This connection is critical for operator safety and electromagnetic compatibility (EMC).
4. 4
   Connect Power Supply: Connect the 24V DC power source to the power supply input terminals. Verify correct polarity (+/-) before connection. Use appropriately sized conductors and ensure the power source is stable and within the specified voltage range.
5. 5
   Connect Peripherals: Connect any required communication cables (e.g., Ethernet, serial) and I/O devices. Ensure all connectors are fully seated and secured. Route cables neatly and away from sources of high electrical noise.
6. 6
   Final Check and Power-Up: After all connections are made, perform a final inspection. Remove LOTO devices and re-energize the main cabinet power. The Panel PC should boot up automatically. Verify system operation and touchscreen functionality.