Siemens 6AV7800-0AA00-2AB0 SIMATIC PC 677 Panel PC

Description

The Siemens 6AV7800-0AA00-2AB0 is a SIMATIC Panel PC 677 designed for industrial human-machine interface (HMI) applications. This unit integrates a 12-inch touchscreen display with a resolution of 800 x 600 pixels into a rugged enclosure suitable for demanding factory environments. It is powered by a Celeron M370 1.5 GHz processor and equipped with 256 MB of DDR266 SDRAM for reliable performance in process visualization and control tasks. For data and application storage, the panel includes an 80 GB SATA hard drive and a DVD±RW±R optical drive. The system operates on a 24 VDC power supply and features a convenient front-side USB port for peripheral connectivity. This model comes pre-installed with Windows 2000 Professional Multi-language User Interface (MUI).

Features

• 12-inch color touchscreen display
• 800 x 600 pixel screen resolution
• Intel Celeron M370 processor at 1.5 GHz
• 256 MB DDR266 SDRAM
• 80 GB internal SATA hard drive
• Integrated DVD±RW±R optical drive
• Front-accessible USB interface
• Operates on a 24 VDC power input
• Pre-installed Windows 2000 Professional MUI

Applications

• Machine-level operator control and monitoring
• Process visualization and SCADA clients
• Data acquisition and logging systems
• Manufacturing Execution System (MES) terminals
• Industrial control cabinet installations

Technical Specifications

Installation Guidelines

1. 1 Prepare Panel Cutout: Verify the control cabinet or panel has a correctly sized cutout for the PC 677 chassis. Ensure the mounting surface is clean, flat, and can support the weight of the unit.
2. 2 Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a consistent seal against the panel surface. Do not overtighten.
3. 3 Connect Protective Earth (PE): Connect the chassis to the main protective earth conductor of the control cabinet using a short, low-impedance connection. This is critical for safety and noise immunity.
4. 4 Connect Power Supply: Connect a stable, correctly rated 24 VDC power source to the power input terminals. Ensure correct polarity. Use appropriately gauged wiring and provide overcurrent protection as required.
5. 5 Connect Peripherals: Connect necessary communication cables (e.g., Ethernet) and devices (e.g., keyboard, mouse) to the appropriate ports. Ensure all cables are routed to prevent strain and interference.
6. 6 Power On and Test: After verifying all connections, re-apply power to the system. Observe the boot sequence and confirm that the operating system loads correctly and the touchscreen is responsive.